Question about Campbell Hausfeld 1/2" Impact Wrench

1 Answer

Wrench support what is the right way to use the impact wrench/

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Impact wrenches are often misused by those who don’t know about their special needs. First of all, it is very important to be careful when tightening a nut or bolt with an impact wrench! Cross threading can occur very easily; a novice may also over-torque a bolt or a nut if they don’t know when to stop. To prevent such problems, always be sure to hand-tighten every nut or bolt before using the impact wrench; if you try to start the nut or bolt with the impact wrench, you won’t be able to feel if the threads are crossed. If the impact wrench is not torque controlled – meaning it will stop when the nut or bolt is tightened to a certain torque – you will need to go slowly, and periodically check the torque value of the nut or bolt to make sure you haven’t tightened it too far.

Posted on Aug 27, 2008

1 Suggested Answer

  • 111 Answers

SOURCE: Oiling a Sears 900.275132 impact wrench

use air tool oil and put a couple of drops where the air plugs in.

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is causing my 3/4" Makita electric impact wrench to overheat and slow down


remove the back cover and use some lube that is safe for electric handtools

Jun 19, 2014 | Makita Impact Wrenches 3/4" Impact Wrench...

1 Answer

Do I need to put oil in a brand new Titan 24volt impact wrench


I have never used that brand of impact, but I have used many others and I have never known an electric impact or drill to need oil. You need oil in an air powered impact because the air motor needs lubrication. The electric motors in electric impacts have sealed bearings and brushes that are meant to run dry. The actual impact assembly should be sealed as well, it should not need any oil.

Jul 13, 2012 | Titan 24v Cordless Impact Wrench

1 Answer

How do I lubricate my new DW293 DeWalt Impact Wrench, and with what oil/grease? The manual I got with the tool says to take to an authorized service professional, which I don't want to do


Its newmatic right just put a few drops oil right down the air feed and a moisture trap inline off the compresser would be goodHowever the picture looks like its electric and you don't realy have to do that now its prelubed and shouldn't be an issue for many hours of service. If it is air then wd 40 works fine the problem comes in when they sit with out use for long peirods of time they rust and seize and thats hard to fix

Dec 29, 2010 | Dewalt "Heavy Duty 1/2" Impact Wrench

2 Answers

Need info & Manuals please.


here are the sites where you can get schematics for both and manuals I'm sure you'll find what you need right there.

if it works for you, don't forget to rate me



thx

May 26, 2010 | Campbell Hausfeld 1/2" Impact Wrench -...

1 Answer

Hammer on Makita model 6905H corded impact wrench 1/2 size broke.


go to web site there is a parts list for your model and order the part

May 01, 2010 | Makita 1/2" Corded Impact Wrench

2 Answers

Charging the battery is useless every time!


I HAVE A ALLEGHENY 24 VOLT IMPACT WRENCH THE CHARGING STAND IS BAD HOW CAN I GET ANOTHER ONE OR CAN YOU TELL ME HOW TO CHARG THE BATTERY?

Nov 09, 2009 | Impact Allegheny 1/2'' Drive 24v Cordless ...

1 Answer

Wrench Maintenance


In line oiler Lubrication is critical to extending the life of your valuable air impact wrench and increase productivity. An air tool that has not been properly lubricated will result in low power output. The usual culprit is a dry motor starving for some oil. Your impact wrench is an expensive investment and you must take the time to properly lubricate it. The easiest and quickest way to make surein line oiler it is constantly lubricated is to install an in line oil lubricator. One of these will insure your air tools are receiving oil every time they are used. In line lubricators attach right into the air hose and you fill them with the correct lubricating oil. (see your manufacturer's specs.). You should also do routine external lubrication through the hammer case grease fitting. A well lubricated air impact wrench will deliver more torque, last longer, run quieter and increase productivity. Don't forget to add an in line oiler to your next impact wrench or air tool. It will pay for itself several times over.

Aug 27, 2008 | Campbell Hausfeld Maxus 3/4" Impact Wrench

1 Answer

Wrench question


An air-powered impact wrench runs off of an air compressor with a tank – the air compressor should have at least a 10 gallon tank and be able to generate at least 3hp. Also, an impact wrench requires special sockets that are designed to withstand the high torque applied by the wrench.

Aug 27, 2008 | Porter Cable Cable Factory - Reconditioned...

Not finding what you are looking for?
Campbell Hausfeld 1/2" Impact Wrench Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Campbell Hausfeld Impact Wrenches & Drivers Experts

River bottom

Level 2 Expert

174 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

John Trevino

Level 3 Expert

1378 Answers

Are you a Campbell Hausfeld Impact Wrench and Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...