Question about Bosch HCBG500, 5 Pc Industrial Hammer Drill Bit Set

1 Answer

Drill how to

How do I add fluid cleanly in a way that wont harm the tool?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hydraulic fluid straight from the drum, has a typical cleanliness level of ISO 4406 21/18. A 25 GPM pump operating continuously in hydraulic oil at this cleanliness level will circulate 3,500 pounds of dirt to the hydraulic system's components each year! To add hydraulic oil, and not the dirt, always filter new oil prior to use in a hydraulic system. This can be accomplished by pumping the oil into the hydraulic reservoir through the system's return filter. The easiest way to do this is to install a tee in the return line and attach a quick-connector to the branch of this tee. Attach the other half of the quick-connector to the discharge hose of a drum pump. When hydraulic oil needs to be added to the reservoir, the drum pump is coupled to the return line and the oil is pumped into the reservoir through the return filter. As well as filtering the oil, spills are avoided and the ingress of external contamination is prevented. The benefits of carrying out this simple modification are well worth the minor cost involved.

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The variable speed on my black and decker drill not working


FIRST it depends on the model Machine most cases its difficult and only left to replace the complete switch because there is inside OR OUTSIDE the switch a mosfet used look right corner downunder the photo how it looked always this mosfet is mounted with a screw on a heatsink if its insite the switch the heatsink is long and on the switch heatsink is outside the switch on if its outside replace the yellow , blue and black cable as its mounted if all black wires then look of the model code name of the mosfet where gate , drain and source are on the wires . in most case the mosfet has sometimes not a standard code to get from Ebay or a shop and also not to get by the importer.

variable-speed-black-decker-drill-not-53vdzirwflgvbk1qgobp3vgz-4-0.jpg

variable-speed-black-decker-drill-not-53vdzirwflgvbk1qgobp3vgz-4-1.jpg

variable-speed-black-decker-drill-not-53vdzirwflgvbk1qgobp3vgz-4-3.jpg

variable-speed-black-decker-drill-not-53vdzirwflgvbk1qgobp3vgz-4-6.jpg

Feb 03, 2016 | Speed Drills

1 Answer

My netbook is stuck on the password i forgot it and t it wont do anything else, how do i get password


Way 1.Turn on the PC,and press F8,enter "With Command Prompt Safety", then input "NET USER+USERNAME+123456/ADD" Do this can change the keyword to 123456
Way 2. Reinstall the system
www.ezbuybatteries.com
http://www.cordless-drill-batteries.com/ Cordless Drill Batteries Replacement Cordless Power Tool Batteries... laptop batteries

Dec 07, 2014 | Sylvania G-Netbook

1 Answer

HOW DO YOU ATTACH A DRILL BIT TO THIS TOOL? i can


it is not a drill, it is a driver. Unless you change the chuck or add one onto it,. sorry to say., it ain't happennin...
Best regards
Ck

Mar 06, 2011 | Black & Decker Pivot Plus Cordless...

1 Answer

Te70 hilti hammer drill


The TE-70 is permantly lubricated. You would only add lubricant if you took the tool apart. You can add a small amount of grease to the end of your bit occasionally before putting in the chuck. This keeps the chuck parts lubed.

Jul 09, 2010 | Hilti TE 7-C 120V Rotary Hammer Drill

2 Answers

Broken driving sharft


you can get schematics at www.dewalt.com

the only way (without harm the armature) is to use a bearing puller or the bearing press with the separator. maybe u can loan it from autozone of advance auto parts, cause is a common tool among car mechanics.








a6f845f.jpgbe054e9.gif

Jun 20, 2009 | Dewalt DW505 Electric hammer drills

1 Answer

I have a craftsmen 18 volt drill. Will it be hurt if I use a 19.


You should never provide more voltage to a tool or motor than what it is designed for. So, as a result, I would advise strongly against it. You have the chance of frying circuits and capacitors very easily by doing so.

On the flip side, using too low a voltage will also result in motor damage. Stick with an 18v battery for an 18v drill.

If you are happy with this answer, please rate this response on FixYa.

Mar 22, 2009 | Craftsman Drills

1 Answer

Fluid adding troubleshooting


Hydraulic fluid straight from the drum, has a typical cleanliness level of ISO 4406 21/18. A 25 GPM pump operating continuously in hydraulic oil at this cleanliness level will circulate 3,500 pounds of dirt to the hydraulic system's components each year! To add hydraulic oil, and not the dirt, always filter new oil prior to use in a hydraulic system. This can be accomplished by pumping the oil into the hydraulic reservoir through the system's return filter. The easiest way to do this is to install a tee in the return line and attach a quick-connector to the branch of this tee. Attach the other half of the quick-connector to the discharge hose of a drum pump. When hydraulic oil needs to be added to the reservoir, the drum pump is coupled to the return line and the oil is pumped into the reservoir through the return filter. As well as filtering the oil, spills are avoided and the ingress of external contamination is prevented. The benefits of carrying out this simple modification are well worth the minor cost involved.

Aug 27, 2008 | Makita Industrial Quad-Driver Countersink...

1 Answer

Drill Question


High pressure fluid is present in operational hydraulic systems. Fluids under high pressure are dangerous and can cause serious injury or death. Do not make modifications, repairs or adjustments to any hydraulic system unless you are competent or working under competent supervision. If in doubt consult a qualified technician or engineer.

Aug 27, 2008 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Drill Presses Safety question


Before connecting a drill press to a power source be sure that the voltage supply is the same as that specified on the nameplate of the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor. Also, when operating the drill press, use safety equipment including safety goggles or shield, ear protection and protective clothing including safety gloves; Keep the area free of tripping hazards; Periodically check that all nuts, bolts and other fixings are properly tightened; Never use your hands to remove dust, chips or waste close by the drill bit.

Aug 27, 2008 | Makita Tools 1/2" Spade Handle Drill -...

Not finding what you are looking for?
Bosch HCBG500, 5 Pc Industrial Hammer Drill Bit Set Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Drills Experts

John Trevino

Level 3 Expert

1383 Answers

River bottom

Level 2 Expert

174 Answers

paulcarew

Level 3 Expert

2364 Answers

Are you a Bosch Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...