- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
You can either contact the people that made it and pay an outrageous price, or you can go to a place like batteries plus and buy a replacement that is what I call a re-pop for about half the price of the maker. You'll find a link to them attached
you can try if this is a Black and Decker tool by going to their website at dewaltservicenet.com and with the model number you can usually find a breakdown or they also have a service center locator to locate one close to you. If this is another brand give me the model number and area you are in and I will try and find one for you.
Yes. The ground will be green or yellow-green, the neutral will be white and the hot is black. This is the standard 110-volt wiring scheme. The neutral is either the white wire or the SILVER lug, the hot is either the black wire or the GOLD lug and green is always ground. some power cords have a green and yellow striped wire instead of the solid green. Just be sure to replace each wire with the same color as the one you are removing