Question about Samsung DouCam VP-D5000i Mini DV Digital Camcorder

1 Answer

My Camcorder Is Not Detected By The IEEE Card.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 473 Answers
Re: My Camcorder Is Not Detected By The IEEE Card.

1. CHECK CAMCORDER CONNECTIONS AND SETTINGS. 1. The DV Camcorder is turned on and connected by the power adapter (not battery) 2. The Camcorder is in Play Mode. 3. The IEEE 1394 cable is properly connected from you camcorder to the IEEE 1394 card. If you have checked these steps and the camcorder is still not detected, then the camcorder driver is most likely not loaded. 2. CHECK DEVICE MANAGER TO VERIFY THAT CAMCORDER DRIVER IS LOADED. 1. Go to Device Manager by clicking on Programs > Settings > Control Panel > System. (In Windows 2000 you have the additional steps of clicking on Hardware > Device Manager). 2. Under the device heading called Imaging Devices, you should see a device called "Samsung DV Camera or DV Camcorder". If you have an exclamation point "!" on this device, highlight the device by clicking on it and then click the Remove and Refresh buttons for Windows 98SE and ME. For Windows 2000, click on the uninstall icon, then click on the scan for new hardware icon. Even if the camcorder device does not have an exclamation point "!" on it, you can remove it and reload it. With Windows ME and Windows 2000, and Windows XP, the 1394 camcorder driver is built into the operating system by Microsoft and is already loaded on your system. With Windows 98SE the files are located on the 98SE CD in the Win98 folder. If the device is not listed, please check all of items in step #1 above. If it continues to be a problem, there may be a problem with the: 1. Camcorders firewire port 2. 1394 cable 3. The 1394 host controller card Samsung does not support Firewire Components. You must consult the manufacturer of your Firewire product(s).

Posted on Sep 06, 2005

Add Your Answer

0 characters

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
3 Points

Related Questions:

1 Answer

Hi there cannot connect i link to my pc no connection on my pc any advice would help


Usually what you would do is buy a IEEE-1394 interface card and install it in your PC in an available slot on the motherboard. You can buy these for less than $20 and with a little tech knowledge about PCs many people can install the card themselves. The IEEE-1394 is called i.Link by Sony. If you are running Windows XP, or Vista, the drivers are already installed. Reboot PC and the new card should be recognized. Use the 4-pin to 4-pin firewire cable to connect camcorder to PC. You will need software to capture your video which should have been supplied by Sony with your camera. For Windows 7, you need to install LIVE Photo Gallery. Your camcorder was setup to work with Windows XP so an alternative may be to just find a friend with an older PC with a firewire card already installed running Windows XP. I just did this very same thing on my PC and it worked. Got the firewire card from Amazon.com for $3.95 VIA brand from Taiwan. I used Windows Movie Maker to capture video. Sony also sells a stand-alone DVD recorder which connects to a camcorder and requires no computer to create DVDs of your video.

Mar 18, 2011 | Sony Handycam DCR-HC24E Mini DV Digital...

1 Answer

How can I get Windows 7 Movie Maker to recognise input from my Sony DCR TRV18E Handycam?


On page 230 of the user manual, it describes how to transfer movies from the camera to a computer using an i.Link (IEEE 1394) cable. You will need the 4 pin i.Link cable and an IEEE 1394 connector on your computer in order to do this. You cannot use the USB cable to transfer the video from this camcorder -- you can only transfer still images using the USB cable.
You will have to buy this i.Link cable and (if you don't have a IEEE 1394 port on your computer) a IEEE 1394 adapter card for you desktop computer. If your laptop computer doesn't have a IEEE 1394 adapter, then you're pretty much out of luck.
Once you have the i.Link and 1394 issues resolved, then Movie Maker should then recognize the camera.

Dec 27, 2010 | Sony Handycam DCR-TRV18E Mini DV Digital...

1 Answer

WE HAVE NOT CONNECT TO PC MYSamsung VP-D371i MiniDV, Digital Camcorder


From the user manual, I've discovered that you have to use a IEEE 1394 cable (see the jacks display on page 11) to be able to download the movies from your camera. The camera does not come with a IEEE 1394 cable -- it only comes with a USB cable, so you will have to buy the cable.
Unfortunately, most PCs do not come with a IEEE 1394 connector and you have to buy an adapter card for a desktop computer. If you laptop does not have a IEEE 1394 port, then you are out of luck.
Once you have the cable and the port on the computer squared-away, check page 87 of the user manual for directions on how to retrieve the the video from the camera to the computer.

Dec 24, 2010 | Samsung SC-D363 Mini DV Digital Camcorder

1 Answer

Putting video from hi-8 camcorder to a dvd


FireWire IEEE-1394 PCMCIA 2 port CardBus Adapter - Increased speed ...Inserting the firewire IEEE1394 cardbus being inserted into the laptop cardbus port ... Make the connection between the FireWire CardBus and your DV camera, ...
www.usbgear.com/Firewire_PCMCIA_cardbus/

Apr 09, 2009 | Samsung SC-D372 Camcorder

1 Answer

Help my


If you have the PV-GS39 Camcorder and are wanting to COPY THE VIDEO FROM THE PV-GS39'S DV TAPE, HERE IS WHAT YOU HAVE TO DO...........

1.Go to: http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS39.D

the above link will take you RIGHT to the web page to download the PV-GS39 Software & Drivers that YOU WILL HAVE TO HAVE. But if you have WINDOWS VISTA then you can use the WINDOWS MOVIE MAKER software that is ALREADY PRE-INSTALLED on your PC then you will NOT have to download the software from the above link.

2. You HAVE TO have a: FIREWIRE IEEE 1394 PCMCIA NOTEBOOK CARD. I got mine at: Best Buy for: $53.86 with taxes. the name of this card is: DYNEX FIREWIRE IEEE 1394 PCMCIA NOTEBOOK CARD.

3. You ALSO hae to buy the CORD that connects to the PV-GS39 and the DYNEX FIREWIRE IEEE 1394 PCMCIA NOTEBOOK CARD, the cord costs $36.79 ALSO at Best Buy.

I did ALL 3 of the above and now I'm copying my movies and videos from my tape in my camcorder onto my PC and BURNING the video onto DVD/CD Disks.

If you have any questions, you can email me at: uggyredmonster@comcast.net.

Sincerely,
Rick D. Michaels

Dec 05, 2008 | Panasonic PV-GS39 Mini DV Digital...

1 Answer

SONY HANDYCAM DCR-TRV280


To download video you need Firewire port, also known as an IEEE 1394 port.
Windows XP or Vista can save your video files.

PCMCIA 2-Port IEEE 1394 FireWire Laptop Cardbus PC Card

Jun 26, 2008 | Sony Handycam DCR-TRV280 Digital Camcorder

1 Answer

Rca vhs-c camcorder cc603


HI DEAR

You can use a mPeg card, like a pinacle dc 10, broadway card,

or a TV Tunner card


oke

cropp

Mar 19, 2008 | Video Cameras

1 Answer

My computer doesn't even recognize my camera


if you are using a desktop, you require a an addon card called IEEE 1394 firewire card, which you have to install it on your motherboard's PCI slot, then using the firewire cable which you get along with the card should be connected to the card and DV port of the camera, then using the MOVIE MAKER software of windows XP, you can download the video.

Aug 13, 2007 | JVC GR-D290 Mini DV Digital Camcorder

2 Answers

Can I use Firewire to transfer video?


Your computer must be equipped with an IEEE 1394 (Firewire) interface and video capture software. Provided you have both of these, follow the directions below. To connect your digital camcorder to your computer using IEEE1394, follow these steps: 1. Connect the IEEE 1394 interface on your camcorder to the IEEE 1394 interface on your computer. 2. Turn on your computer. 3. Turn on your camcorder. 4. Start the video capture software on the computer. Image capture should begin provided the computer hardware and software are configured correctly. If image capture does not begin, you must consult the computer or capture card manufacturer for assistance. Note: If you don't have an IEEE 1394 interface on your computer, you can buy an IEEE 1394 pci card at your local computer store that will work with most current computers.

Sep 06, 2005 | Samsung DouCam VP-D5000i Mini DV Digital...

Not finding what you are looking for?
Samsung DouCam VP-D5000i Mini DV Digital Camcorder Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Video Cameras Experts

Tony

Level 3 Expert

2598 Answers

Pieter Vleeshouwers

Level 3 Expert

1253 Answers

Chris Hunt

Level 3 Expert

1342 Answers

Are you a Samsung Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...