Question about D-Link AirPlus G Wireless Range Extender DWL-G710 (dwlg710) Repeater

4 Answers

Sitecom WL-130 Wireless Network Range Extender

I have Sitecom WL-130 Wireless Network Range Extender device but i can`t access the net i have compaq presario v6000 laptop with windows vista...............
can u suuges me somthing

Posted by on

  • 345345fdgdfg Aug 27, 2008

    i have same troble

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

It seems that this product isn't suitable for vista computers. I had the same thing happen top me, so I installed it onto my other computer which is XP and no problems.

Posted on Nov 04, 2008

I have the same problem. I type in 192.168.1.1, which I know is the proper adress, but it doesnt load and instead makes a google search on it. I'm using IE 8 I think, and I tried putting on proxies, but then it asks for me to enter an adress for the proxy. What to fill in there? 192.168.1.1 doesn't work.

Posted on Sep 05, 2008

Same here

Posted on Aug 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

For extending / repeating WIFI signals there's quite a bit of details to know about.

Read about repeating a WIFI signal with a sitecome WL-130 WIFI repeater here.

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a DWL-G710 wireless extender that will not


First I would try a reset, as this extender should would with your default settings of your network.
I would suggest just giving your router a reset. Here are the procedures for your particular router:
Reset Procedure
Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

make sure to setup your wireless security again and make sure to set an admin password on your router after the restart.

Oct 31, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

Ip conflict after setting up dwl-g710, after setting up the extender i cannot access it because my pc reports an ip conflict, any suggestions would be appreaciated


Hi,

You will get an IP conflict if you have assigned the same IP address on your network devices. Every networking devices should have different network address or IP address. If for example the IP address of your router is 192.168.0.1, then your wireless expander can be configured as 192.168.0.2, 192.168.0.3, 192.168.0.4 and so on but not 192.168.0.1 since it is already being used by the router.

Jun 30, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

Problems configuring WL-130 Wireless Extender


http://192.168.0.1

then type user name:admin
password is:admin or blank

then enable DHCP.then u can get ip automatically.

Nov 12, 2008 | Repeaters & Transceivers

2 Answers

No internet connection via DWL-G710


Your extender may not be able to talk to the router. Make sure you have set default gateway in extender to IP of the router. Turn off encryption first. Check the router if extender shows up in active client list or active mac address list.

Oct 18, 2008 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

Dwl-2100ap set up propblem


There's quite a bit to know about extending / repeating WIFI signals.

Read about extending a WIFI signal with a Sitecom WL-130 repeater here.

Sep 05, 2008 | D-Link AirPlus G Wireless Range Extender...

3 Answers

Setup range extender


Access pointe bağlanmak için öncelikle bilgisayara elle ip adresi vermek zorundasınız daha sonra cihazı ethernet yoluyla bağlayarak ayarlayabilirsiniz.Ancak modeme bağlarsanız ip adresini ayarlamak gerekmez.Kolay gelsin.Good By

Jul 18, 2008 | D-Link AirPlus G Wireless Range Extender...

1 Answer

Wireless extender


OK.
It's pretty easy:
1) turn on both devices
2) connect to sitecom device.
- you may have to manually set your IP address. (from network resources control panel, TCP/IP tab. Check the istructions, cause you have to choose an address in the same subnet of the sitecom range extender. I mean, the first three numbers must be the same, and the last number of the address must be different, between 3 and 255).
- now you can type the sitecom address into the address bar of your browser (allow pop ups from that address!). The defaut user name is admin, as well the default password.
3) Ok, now you're connected and you just have to set this way in the basic settings:
working mode: universal repeater
now click on site survey and remember the ssid of your main network, and the channel number.
channel: type the channel number of your network (IT MAY CHANGE WHEN YOU TURN OFF\ON THE ROUTER!! so you'll have to change it maybe every day..... **** sitecom device, I HATE IT)
ssid: the ssid of your main network.
4) click apply.
Of course if your WLAN is protected you must set the rigth password and encription algorithm...

Now it should work.. but remember, everyday you will have to change the channel, and sometimes ou will have to reset it, from he toolbo tab.

IT,S BETTER NOT TO BUY THIS DEVICE, cause even the latest firmware is not working properly.

Jul 13, 2008 | Repeaters & Transceivers

2 Answers

Problem with sitecom wl-130 connection


I think I have the solution: you have to click on the basic settings tab, then n "site survey" button, then (optional) on "refresh" button.
Now you will get the information about your network, and you just have to check the channel number of the signal from your main router. then you have to set that channel in the "channel" button of the basic settings tab. You also have to choose Universal repeater as working mode of the sitecom device, instead of Access Point.
Hope it helps.
By the way, all these settings should be automatic in such a device.... But this sitecom range extender is ****.
I suggest everybody is reading: DON,T BUY THIS ITEM!!!! Spend 10 bucks more and get a working one!!!

Jun 01, 2008 | Repeaters & Transceivers

2 Answers

Having Problem Acquiring IP Address


when using the range extender you have to make sure you set the SSID, channel & wireless key in the range extender the exact same as the router also it has to be in the same IP range so if the router IP address is 192.168.0.1 the range extender IP address has to change from 192.168.1.240 to 19.168.0.240. Hope that helps.

Dec 25, 2007 | Linksys Wireless-G Range Expander (WRE54G)

Not finding what you are looking for?
D-Link AirPlus G Wireless Range Extender DWL-G710 (dwlg710) Repeater Logo

2,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Repeaters & Transceivers Experts

jrock3144

Level 1 Expert

9 Answers

Brad Brown

Level 3 Expert

13536 Answers

MrHandyman2
MrHandyman2

Level 2 Expert

106 Answers

Are you a D-Link Repeater and Transceiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...