Question about Casio Cassiopeia E-115

2 Answers

E115 main memory problem

My main memory seems to be fine when i use the device itself but when i try to put something on the device it says the memory is full. It will sometimes lock up after i try to transfer a program. When i move the memory adjuster thing towards the storage end (i think) it freezes too. After it freezes i have to pop out the batteries and reset the thing. Is it fixable? I would appreciate help. I was also thinking i could by a e125 with a busted screen and pop my e115 screen on it. How complicated is this and will it work? Thanx

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 551 Answers
Re: e115 main memory problem

There are several ways to solve your problems permanently. Get the largest CF card you can jusify & install all your non communication software - which will allow it - on this card & store all your datafiles on it too. Use software like Startap to access these applications dynamically. If you use CF modem the cf-card would not be available for storage by communication software. Secondly get into the habit of exiting / turning off the application you are not currently using in stead of putting them in the background as the OS normally does. Applications like Gigabar/KillMe work very well. As far as possible get into the habit of editing your information only on one device - like either the desktop or the PDA - to avoid duplication of datafiles/records. When you soft reset the device what you are essentially doing is closing all the applications running in the background.

Posted on Sep 06, 2005

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 551 Answers
Re: e115 main memory problem

The memory problem can be fixed easily. It is not only you. It is a common problem with some pocket pc. Instructions according to Casio Customer Service: You will have to back up all of the data. Then remove the backup battery and main battery for ten minutes. Restore all of your files and you should be back in business. Also, to prevent this from happening again and to keep program memory high, perform a soft reset at least once daily. This will almost certainly fix your problem.

Posted on Sep 06, 2005

Add Your Answer

0 characters

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
3 Points

Related Questions:

1 Answer

It seems that my HTC touch doesn't recognize it's


try to read the memory card on any other device or computer using card reader.. if its working fine there, try to format it using FAT options..

Mar 15, 2010 | HTC Touch P3450 Smartphone

1 Answer

Yesterday, when trying to send and receive email, i got the message "The remote party has ended this connection." Then today, screen started to freeze on text messages. Then finally, phone can't get...


It seems software problem.Try again reseting the device like that

You can reset your device’s settings and clear all added
data from memory.
Resetting the device
1. On the Home screen, press the Start soft key.
2. Select Settings → More... → Security → More... →
Reset.
3. Enter the reset password and press the Done soft key.
The default password is “0000.”
4. Press the Yes soft key to confirm the reset.
5. Press the Yes soft key to confirm deleting DRM files.
The device resets and reboots itself.

Jan 08, 2010 | Samsung Blackjack SGH-I607 Smartphone

1 Answer

My computer won't recognize my treo 700ws. What's wrong?


try a hard reset. what sync program are you using?take the program off put it back on driver will update it self.

Feb 14, 2009 | Palm Treo 700w Smartphone

1 Answer

Everythings gone


Most users will think you got a phone virus but actually they aren't that harmfull. You need to check the card however. Try to connect it to a card reader at your computer or in another phone to see if your files are still there. If the files are intact, or if the card works properly (try to copy something to it, then copy same file back to the device) maybe the problem is with your phone. Try to reset the phone to factory defaults. Before that please save all important documents or contacts because this will erase them and put the phone in the same status as it was when you bought it. After you have reseted the phone try again to connect the memory card and see what happens. This way you will know for shure if the problem is related with the card or the phone. If something still doesn't feel right please feel free to post back. Also, please remember to rate solutions received throught this site ;) Good luck.

Feb 26, 2007 | Nokia 6630 Handheld

1 Answer

How can I free some ram memory ?


Is it this game? http://www.gomdm.com/p_aoe.asp If so, your device isn't listed as compatible on that site -- That doesn't necessarily mean it won't work, but they may realize that the 1710 is memory constrained... Have you tried a hard reset and then install only the game to SD? If it doesn't work then, it never will...

Sep 08, 2005 | HP iPAQ RZ1710 Pocket PC

3 Answers

E-125 No Power


are you checking your adapter. i had the same problem with my casseopeia e115. i searched and searched for the battery which even casio doesn't offer anymore. i bought a battery pack which works great w 4 AA batteries but it's bulky and you lose data when you turn off the batteries. i finally went on to discover that my charger/adapter that plugs into the e115 and the serial cradle was scorched by a lightening strike and it was not charging and eventually the batteries DIED!!! I took the adapter to an electronics repair store and for $15.00 they rewired the adapter and it works!!!! it charged the batteries and worked fine.(altho i have to visit them again because i think one of the new wires is bent and i have to position it perfectly to keep charging.) BTW: any one looking for a new casio battery jk210lt...i have a couple to sell! ;-) hope this helps

Sep 06, 2005 | Casio Cassiopeia E-125 Pocket PC

1 Answer

Casiopeia E115 has dark section of screen?


This has been apbroblem with Casio E-100 to E-115. The LCD display is connected to the main PCB via a flexible circuit which also carries the display driver ICs. This circuit presses against some components on the PCB near the power button. Over a period of time with generated heat this circuit gets deformed & shifts the phase for the upper 1/3 of the display. So you will notice if you reset the device this very portion is brightly lit in stead of being completely black like the rest of the display. There is not much you can do except change the Display unit consisiting of the LCD, Digitizer & the backlighting fluorescent lamp. It is not a very difficult job if you are not 10 thumb variety. You could try heating this flex with hot air gun & flattening it again. However you might be taking a big chance withthe display. You could try Pacific parts / casiosalesandservice for replacement. There were two version used in your device. So compatibility could be an issue. Contact mre directly if you need further assistance. Hope this helps ???

Sep 06, 2005 | Casio Cassiopeia E-115

2 Answers

E115 Won't Hold Battery Charge


You might hook your charger up to your battery and check the voltage that you are getting when it is fully charged. It may be that the charger is bad. Your voltage when fully charged with the battery on it should be a little over the rated voltage of the battery. Just a thought. Be sure you are using the correct poweradapter/charger also. Reply With Quote

Sep 06, 2005 | Casio Cassiopeia E-115

1 Answer

Replaced my Casio E115 screen - now touchscreen doesn't work!


There are 2 things you have to check for. The touch screen was changed in the middle of production run. The flexible connector & the corresponding socket on the main board were inverted. In other words the exposed track side was moved from upper to lower side. The older type of touch scrteen is no longer available. Casio made the socket available to their service centre to change in on the main board to suit the newer type of touch screen. If this is the case you will have to get the newer type touch screen to suit the E-115. The second aspect is that there are 4 self adhesive spacer tapes (approximately 3 mm x 80 mm x 0.5mm thick on the long side & 3 mm x 60 mm x .5 mm on ythe short side) on the periphery of the LCD. This is to keep the touch screen from touching the LCD. This is to prevent Newton's rings as also to prevent malfunction of the touch screen. These are an absolute must. Other than that the touch screens are absolutely the same. Hope this helps.

Sep 05, 2005 | Casio Cassiopeia E-115

Not finding what you are looking for?
Casio Cassiopeia E-115 Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio PDAs Experts

k24674

Level 3 Expert

7983 Answers

kakima

Level 3 Expert

92728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Casio PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...