I have the serial number to the radio and the vin # of the 95 accent from what i have read with that info can you supply w the 4 digit code i need to unlock my radio??

Must have a VIN and you will need to pull the radio out for the serial number. It will be a VWZ...... number. You will have to call the dealer with that info to get the 4 digit number. Only a dealer has access to the VW server to get the code.

If you pull the radio out there should be a 4 dig code written on it and if not than write down the serial # and the VIN # of the Veh and go to the nearest dealership and they should get the info for you!!!!

Need to go to the dealer with your VIN number and proof of ownership if radio is factory installed. If aftermarket you need to contact the manufacturer.

You can get the code - but it will require some work. The dealer should be able to retrieve this info w/o much difficulty - but will charge more for it. You may want to try a different dealer. In any case, below is how to do it for $29 when the dealer won't. You'll need to know the make, model, year of the car and a valid email address in order for the code to be sent back you.

Remove the radio from the dash and copy the serial number (you must remove the radio from the dash to do this).

Locate & copy the Vehicle Identification Number or VIN (on the car itself or registration documents).

Go to http://www.radio-code.com/HyundiaPayPageRadiocode.htm and fill in the info at the bottom of the page.

*** Please click the "Was this helpful? Yes" (thumbs up)! ***

FREE and EASY methods to get your Honda radio UNLOCK CODE. (Dealerships usually charge)

Assuming you don't have the Anti-Theft Code and Serial Number that isfound on the credit card sized Anti-Theft Radio Identification Cardthat comes with the vehicle at the time of purchase and is usuallyfound in the glove compartment....

You have FREE options to retrieve that code by phone or on the internetBUT, the RADIO SERIAL NUMBER is REQUIRED (no matter what). (see bottomabout removing ERROR E3)

***IF your Honda was made BEFORE 2001 the serial number MAY not be accessible without removing the radio from the vehicle.***

* TO GET THE SERIAL NUMBER (so that you can get the unlock code)

1. Get something to write with and on (you'll need it to write down the serial number)
2. Put the ingnition key in and turn it until your able to turn your radio on (accessories position).
3. Then turn your radio OFF by it's knob/button (but leave the ingition key in place).
4. Hold down the preset buttons 1 and 6 at the same time.
5. Turn the radio on while pressing down both the 1 and 6buttons.(***IF your Honda doesn't have preset buttons on the radio thenhold down the top part of the 'Seek/Skip' button AND the top part ofthe 'Change Disk' button instead.*** )
6. Write down the 4 numbers you see first and then 4 more thatdisplay. These eight numbers are the SERIAL NUMBER. This is NOT yourCODE.
7. Make sure your VIN (Vehicle Identification Number) is handy toget the unlock code. (can be found on your insurance card, driver'sside door jam, small plate on dashboard by registration and inspectionstickers, etc)

* TO GET THE UNLOCK CODE (using the radio Serial Number and VIN)

---Internet option:

1. Go to https://radio-navicode.honda.com/ (YES, it's run BY HONDA and IT'S FREE)
2. Follow on screen instructions (Serial Number and VIN required)
3. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

-OR-

---Telephone option:

1. Call American Honda Customer Relations (800) 999-1009
2. When the automated message starts 'Press 3' for 'Radio and Navigation Codes'.
3. Tell the Customer Service Agent you need your radio code. (Theywill ask for your name, your radio's serial number, VIN, etc)
4. When they give you your radio unlock code--WRITE IT DOWN and KEEP IT SAFE!
5. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

* REMOVING ERROR E3

****If you entered too many wrong codes and got an ERROR E3 messagedisplaying you'll need to do an additional step for even the correctunlock code to work.****

Disconnect your negative battery terminal (or pull the radio fuse outif that's easier for you) for 30 seconds then reconnect it and then theradio will say "CODE" again and you can put in your correct unlock code.

-----------------------------------------------------------------------------------
So what happened to begin with?
See also: http://automobiles.honda.com/information/frequently-asked-questions.aspx?Question=2

If the power from your battery to the Honda radio is interrupted theAnti-Theft feature kicks in, the radio is rendered inoperable and thescreen reads 'CODE'. You must enter in the Anti-Theft Radio Unlock Code(usually 5 digits) to make it operational again. You know that much bynow.

Any time battery is disconnected the radio has to have a code reentered. This is a theft prevention issue. You should have gotten the code if you bought the car new, if not call the dealer and he can provide it.

Re key less entry have no idea but could be same issue.

FREE and EASY methods to get your Honda radio UNLOCK CODE. (Dealerships usually charge)

Assuming you don't have the Anti-Theft Code and Serial Number that is found on the credit card sized Anti-Theft Radio Identification Card that comes with the vehicle at the time of purchase and is usually found in the glove compartment....

You have FREE options to retrieve that code by phone or on the internet BUT, the RADIO SERIAL NUMBER is REQUIRED (no matter what). (see bottom about removing ERROR E3)

***IF your Honda was made BEFORE 2001 the serial number MAY not be accessible without removing the radio from the vehicle.***

* TO GET THE SERIAL NUMBER (so that you can get the unlock code)

1. Get something to write with and on (you'll need it to write down the serial number)
2. Put the ingnition key in and turn it until your able to turn your radio on (accessories position).
3. Then turn your radio OFF by it's knob/button (but leave the ingition key in place).
4. Hold down the preset buttons 1 and 6 at the same time.
5. Turn the radio on while pressing down both the 1 and 6 buttons.(***IF your Honda doesn't have preset buttons on the radio then hold down the top part of the 'Seek/Skip' button AND the top part of the 'Change Disk' button instead.*** )
6. Write down the 4 numbers you see first and then 4 more that display. These eight numbers are the SERIAL NUMBER. This is NOT your CODE.
7. Make sure your VIN (Vehicle Identification Number) is handy to get the unlock code. (can be found on your insurance card, driver's side door jam, small plate on dashboard by registration and inspection stickers, etc)

* TO GET THE UNLOCK CODE (using the radio Serial Number and VIN)

---Internet option:

1. Go to https://radio-navicode.honda.com/ (YES, it's run BY HONDA and IT'S FREE)
2. Follow on screen instructions (Serial Number and VIN required)
3. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

-OR-

---Telephone option:

1. Call American Honda Customer Relations (800) 999-1009
2. When the automated message starts 'Press 3' for 'Radio and Navigation Codes'.
3. Tell the Customer Service Agent you need your radio code. (They will ask for your name, your radio's serial number, VIN, etc)
4. When they give you your radio unlock code--WRITE IT DOWN and KEEP IT SAFE!
5. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

* REMOVING ERROR E3

****If you entered too many wrong codes and got an ERROR E3 message displaying you'll need to do an additional step for even the correct unlock code to work.****

Disconnect your negative battery terminal (or pull the radio fuse out if that's easier for you) for 30 seconds then reconnect it and then the radio will say "CODE" again and you can put in your correct unlock code.

-----------------------------------------------------------------------------------
So what happened to begin with?
See also: http://automobiles.honda.com/information/frequently-asked-questions.aspx?Question=2

If the power from your battery to the Honda radio is interrupted the Anti-Theft feature kicks in, the radio is rendered inoperable and the screen reads 'CODE'. You must enter in the Anti-Theft Radio Unlock Code (usually 5 digits) to make it operational again. You know that much by now.

Don't post your s/n & vin online!!

FREE and EASY methods to get your Honda radio UNLOCK CODE. (Dealerships usually charge)

Assuming you don't have the Anti-Theft Code and Serial Number that is found on the credit card sized Anti-Theft Radio Identification Card that comes with the vehicle at the time of purchase and is usually found in the glove compartment....

You have FREE options to retrieve that code by phone or on the internet BUT, the RADIO SERIAL NUMBER is REQUIRED (no matter what). (see bottom about removing ERROR E3)

***IF your Honda was made BEFORE 2001 the serial number MAY not be accessible without removing the radio from the vehicle.***

* TO GET THE SERIAL NUMBER (so that you can get the unlock code)

1. Get something to write with and on (you'll need it to write down the serial number)
2. Put the ingnition key in and turn it until your able to turn your radio on (accessories position).
3. Then turn your radio OFF by it's knob/button (but leave the ingition key in place).
4. Hold down the preset buttons 1 and 6 at the same time.
5. Turn the radio on while pressing down both the 1 and 6 buttons.(***IF your Honda doesn't have preset buttons on the radio then hold down the top part of the 'Seek/Skip' button AND the top part of the 'Change Disk' button instead.*** )
6. Write down the 4 numbers you see first and then 4 more that display. These eight numbers are the SERIAL NUMBER. This is NOT your CODE.
7. Make sure your VIN (Vehicle Identification Number) is handy to get the unlock code. (can be found on your insurance card, driver's side door jam, small plate on dashboard by registration and inspection stickers, etc)

* TO GET THE UNLOCK CODE (using the radio Serial Number and VIN)

---Internet option:

1. Go to https://radio-navicode.honda.com/ (YES, it's run BY HONDA and IT'S FREE)
2. Follow on screen instructions (Serial Number and VIN required)
3. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

-OR-

---Telephone option:

1. Call American Honda Customer Relations (800) 999-1009
2. When the automated message starts 'Press 3' for 'Radio and Navigation Codes'.
3. Tell the Customer Service Agent you need your radio code. (They will ask for your name, your radio's serial number, VIN, etc)
4. When they give you your radio unlock code--WRITE IT DOWN and KEEP IT SAFE!
5. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state.

* REMOVING ERROR E3

****If you entered too many wrong codes and got an ERROR E3 message displaying you'll need to do an additional step for even the correct unlock code to work.****

Disconnect your negative battery terminal (or pull the radio fuse out if that's easier for you) for 30 seconds then reconnect it and then the radio will say "CODE" again and you can put in your correct unlock code.

-----------------------------------------------------------------------------------
So what happened to begin with?
See also: http://automobiles.honda.com/information/frequently-asked-questions.aspx?Question=2

If the power from your battery to the Honda radio is interrupted the Anti-Theft feature kicks in, the radio is rendered inoperable and the screen reads 'CODE'. You must enter in the Anti-Theft Radio Unlock Code (usually 5 digits) to make it operational again. You know that much by now.

I just posted a solution for this problem. It comes straight from the radio manual. The dealer should have told you this. If you want him to do it he'll charge money for his time. IF YOU LOST YOUR CODE. THE DEALER CAN HELP YOU OR IF YOU HAVE YOUR 4 DIGIT CODE: