Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Easyshare 5300 My printer says 'Printhead loose, not installed correctly" How do I remove it?

Posted by on

  • Anonymous Sep 05, 2008

    Just tried to set up my printer yesterday - brand new out the box and followed the instructions carefully (not to touch the copper contacts at the back of the printhead) and got the same response - so couldn't get any further. Spoke to Kodak who said they could do a firmware upgrade on line to see if that would help, with no guarantee, or take the printer back to the retailer.

  • winja Sep 18, 2008

    I had the same problem but mine happened on about the 5th time of printing,I rtd it to PC World who changed it.The same fault has happened with the new one.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Try removing and then reinstalling the printhead five times. Remove the ink catridges, above where the black ink tank was sitting there should be a square hole, if you feel right above that hole, you should feel a button there that you can press.

Posted on Sep 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Easyshare 5300 printer only yellow


Try to clean the printhead

Press Menu > Clean Printhead

If stil the same

call 18004216699 for free printhead replacement

Mar 11, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Just installed new printhead and new black and colored ink cartridges. I do not have a calibration calibration sheet any longer. This is for Kodak easyshare 5300 printer.RAU


When you install new printhead in the printer, you will get a message" New printhead detected ,load papers in paper tray and press start. If u do not get this message,that means you have not installed printhead properly. Visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead to see how to install printhead correctly

Dec 03, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Replacement of printhead for easyshare 5300


kodak offers free replacement of printheads,if u have new printhead, log on to www.kodak.com/go/printheadsupport and u can see how to install new printhead. call kodak 1800 421 6699 for further issues

Jul 18, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

5 Answers

How do I remove old printhead and install a new one?


open the access door at the top of the printer

Remove the ink cartridges

Put your finger in the upper left corner of the printhead ( inside)

you will feel a small latch rigth there push it upward

the printhead will loose and you may now remove the printhead

Jan 24, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Kodak ESP 9 All In one Printer Need directions to remove exiting printhead


push the button on the top left of the printhead after removing the black and color ink cartridges

Jan 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer


try to do this, power cycle your printer, turn off, unplug the power cable for 20sec. then plug it back again, try to remove and then reseat your printhead 5 times. make sure that you hear the snapping sound when you insert your printhead into your printer. if it still not work, call tech support of kodak. maybe your printhead is defective.

AIO Tech. Support 1-800-421-6699

Oct 02, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Owners manual for kodak 5300 printer


Hi - You can download the manual from the link below:

Kodak 5300

Please update the question & let us know if the information given was useful to you - Good Luck!

Jul 08, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

4 Answers

Kodak EASYSHARE 5300....Problem:


I cannot get the printer to work on the USB cable. I have tried about everything. Seems that the drivers are there but there is something else wrong. Now what?

Nov 26, 2007 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Cindy Wells

Level 3 Expert

4951 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...