Kind of desperation here, but my TV has no image, sound is OK. I have switch cables, turned off and back on, tried the TV Input a few times. Still no image, should I start looking into calling a repais or is there a way to reset this thing. I cannot see anything, nothing, no menu, no nothing.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your main pcb could still have gotten damaged due to the defective caps. The reason you still have audio through the optical is because it is a digital signal only. It is not running through the audio amplifier on the main board. I would suspect either the main pcb or the speakers them self.
Are you using an HDMI cable from your cable box to the TV? I found that the sound greatly improved and volume control was better after switched to an HDMI cable. Originally I was using component cables that were supplied by the cable company. Note: I bought my HDMI cable on line for $10. I've seen the same cable in the store for $35.
the old saying is that any issues will likely show up in the 1st 3 days if you run it for 72 hrs. if it dosent fail then it will last. other than going to the show room and seeing if their unit does the same. they will likely want to send a service guy to check it out and decide for himself.