I have a pldt plan 990, edimax br6428ns wireless router, se260 modem. can not connect to internet.

Check your connections, it should be like this: PLDT modem -> router -> computers. If you connect a computer to the PLDT modem, it won't be seen by other computers in your network. Make sure that all of your computers are connected to the router, and not to the modem. Your modem should also be connected to the router's WAN port and not on the LAN port.

No, it means it cannot set up a Internet Connection.
Try Powering Off and On again, if not contact your Internet Supplier.

Sure you can that. 1. you have new internet connection. need to configure the router according to internet connection type. it could be manually ..
2. set the wireless settings on the router again manually.
then try to connect the router.

If you need my help
the send me some information about the network.
1. when you connect your pc to modem what ip address you get.
2. what ip you get when u connect your pc to router. make hard wired in both condition.


and possible send me your email add.

Yes Compatible With my DSL pldt Just setup the user name and password Tel number @pldt
and your password that is your referent number.

if your connection is Dynamic just power cycle the modem and the router

Try to make sure if the router is connected to the modem. In the router, try to make sure that it is using PPPoE.

Hi...
Use the setup wizard under Internet Explorer - (go to: Tools, Internet Options, Connections, Setup) Choose the right connection after the setup... close the IE browser and reload it... If it doesn't work... you have to set the IP and DNS to Auto.... keep me posted if your still have problems.

please confirm if the router is a 6104K, or a KP or Wg or another model as the K and KP are not wireless, a "W" will denote wireless capability...

Not all manuals are available for download from the Edimax website but heres a start...

Connect the router to your PC with a cable... leave the modem disconnected to start with

open internet explorer and type in enter the default IP address 192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

This should bring up a user/password dialog box. By default the user name is "admin" and the password is "1234".

Confirm you are getting this far and we'll go the next steps

hello!

-- who is your internet service provider
-- what is the operating system of your computer?

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

HI,
  Actually in short  "you NEED A MODEM;"
In order to connect your router you need to connect a modem in "bridge mode'( bridge mode is nothing but a configuration on the modem)..


this is a picture of  rear side of a  router,,, you have to connect the modem into the wan port of the router (above),, and in port number 1,2,3,4 you can connect your computers,

Try set the Edimax router to accept a Dynamic IP from the ISP - cause I guess they provide it to you changed everytime you disconnect.