Question about Olympus Camedia C-2000 Zoom Digital Camera

1 Answer

Information about a picture's settings

I own a C-2000Z digital camera. Great camera, but how can I view information about a picture's settings such as f/stop, shutter speed, white-balance compensation mode, flash synch mode, EV Compensation, etc. AFTER the picture has been downloaded to my computer? The Olympus CAMEDIA software only displays image size, flash on/off, and other top-level information in the "properties" page for an image. It seems CAMEDIA has not been updated to display the additional information that the C-2000Z captures over and above that captured by, say, the D-400 camera. Is there any software/shareware that displays the full detailed image info?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 852 Answers

I use Thumber to do it. It tells me everything I want to know - shutter > speed, F stop, ISO, zoom position, date and time down to the second, > plus some other things I don't remember. Thumber was freeware when > I downloaded it.

Posted on Sep 06, 2005

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camera has lost some information in playback mode


While viewing the picture, press the DISP button to cycle through the different views.

Oct 08, 2012 | Canon PowerShot SX150 IS Black 14.1...

1 Answer

Camera lost some of the information in playback mode


While viewing the picture, press the DISP button to cycle through the different views.

Oct 08, 2012 | Canon Powershot Sx150 Is 14.1 Mp black...

1 Answer

Solution for blur camera nikon d5000 when take pickture at night time


It may be your exposure combination. The blur is because your shutter speed is too slow. You did not say what you are photographing at night and without that information, I can only speak in generalities. It all depends on the light source. If you are taking pictures of illuminated signs, auto exposure modes might work great, but if you are shooting incident light rather than pointing your camera at the light source, I would use a tripod and use manual exposure. Adjust your ISO to a high number. That will allow a faster shutter speed to stop motion.

Jun 30, 2012 | Nikon D5000 Digital Camera

1 Answer

Evening My Canon 400D Eos SLR will not take photos in manual mode setting , goes through the motions of shutter open and close but when it comes to viewing the picture on the lcd display ( nothing there)....


Okay lets put some "joy" back into your photo's The reason you aren't getting anything is because your shutter speed is to fast. Your setting I think you are trying to say are F5.6 100 ISO and 1/100 shutter speed "M" manual setting. Actually if you looked closely on your "nothing there" there would be something. Anyway, Moon shots as simple as they look are anything but simple. The earth is moving and you are trying to take a still shot. I don't know where you are on this earth and every star system is different. Starting with a good solid tripod, next the lens needs to have a great enough focal length so the moon covers 2/3rds of the view (first shot) ISO 100 is good. In manual mode look at your light meter try to have your F-stop at F8 or F11 and adjust the shutter speed for proper exposure, you may need to adjust your aperture up or down once you have a "normal" exposure either increase your shutter speed or preferably stop down the lens two stops.
Your camera will meter down to 30 seconds if it goes below this then this is where you take your start (first shot) meter reading and count how many stops of light you require beyond 30 seconds.
For practice though attempt to stay within the 30 seconds by increasing the aperture but not wide open say F8 is as low as you go, need some speed adjust the ISO up to ISO 200 then ISO 400 don't go beyond this because other factors come into play at this point. the thing is you need to establish a metering point then stop down two stops and see what you have as far as exposure.

I know this may all sound really complicated but it's not the most important thing is to have a good tripod use F8 as your widest aperture don't increase beyond ISO 400 and keep your shutter speed at 30 second or above. Another problem that will occur is focus actually the lack of, your camera requires contrast to focus one you have established this shift the lens into manual and recompose your scene. What we aren't done yet don't touch the camera when your release the shutter. Use the 2 second time delay to give the camera time to stop vibrating after the shutter has bee depressed remove your hand DON'T touch it until the picture is finished. If it were me I'd be looking at doing a few landscapes at night to get use to all this stuff then tackle the moon so to speak. In the mean time here is a picture of The Fork Of the Thames in London Ontario Canada.
Picture here
tri3mast_162.jpg

Jan 14, 2011 | Canon EOS 450D Digital Camera

2 Answers

How can I stop displaying the photo information on the view finder?


In the viewfinder? The viewfinder will always display things like the f/stop and the shutter speed while you're preparing to take a picture. This cannot be turned off.

If you mean on the monitor on the back when reviewing your photos, simply press up/down on the multiselector to cycle through the different views of your photos.

Jan 10, 2011 | Nikon D40x Digital Camera

1 Answer

I'm having problems with the settings on my Canon EOS 400D. When I take pictures in AV mode I can get quality pictures but in TV or M modes the pictures always come out so dark even when taking them...


You need to understand the relationship and teractivity of aperture, shutter speed and iso. In Av mod, you choose the aperture and the camera makes thw shutter speed agjustment, In Tv mode, you set the shutter speed and the camera makes the aperture adjustment, In manual, you have to set both shutter speed and aperture manually. If the ISO mode is set to AUTO, the camera chooses the sensors sensitivity to light automatically. Change to specific ISO
(200-400 for daylight and 799-1600 for night). Take a picture in AV mode and note what shutter speed the camera chose. Then switch to TC mode choose the same shutter speed and see if camera chose the same aperture(f-stop) you chose in first shot. Change to Manual and choose same f-stop and shutter speed the camera chose for you in the other modes. Compare all three photos. They should be almost if not exactly the same exposure wise.
In Tv mode choose a dlowers shutter speed, In Manual choose a combo of slower shuuter and wider f-stop(smaller number). Read your manual.

Jan 02, 2011 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Our D60 used to take great pictures. I only use it on Auto since most are pics of people or still objects and really I don't know to use all the settings. All of a sudden, the shutter speed is now very...


The pictures are blurry due to camera shake, which in itself is caused by the slow shutter speed. Try using shake reduction setting. To increase the shutter speed, raise the ISO rating.

Sep 06, 2017 | Nikon D60 Digital Camera

1 Answer

Pictures are "grainy"


This may work, remove the batteries to try to "reset" the camera.

Jul 03, 2008 | Fuji FinePix S5700 Digital Camera

2 Answers

Shutter speed


The shutter speed on my pentax optio e10 is so slow. I hate the camera and wouldn't recommend t.

Nov 27, 2007 | Pentax Optio E10 Digital Camera

1 Answer

Shutter speed


You need to let the camera auto-focus time to do its job. Press and hold the shutter button half way until the white square in the LCD display (or LED light next to the view finder) turns green, then press the button all the way down for the camera to take the picture.

Nov 24, 2007 | Olympus SP-500 UZ Digital Camera

Not finding what you are looking for?
Olympus Camedia C-2000 Zoom Digital Camera Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...