Question about DVD & Blu-Ray Players

1 Answer

Curtis DVD player - Stuck in Load Mode so won't open - dvd inside - correctly seated - but may not be compatible. I just burned it & was testing it.) Have tried the paper clip in the tray release hole - but this doesn't work - probably because the machine is load mode. Need ideas on how to get it out of load mode. MD

Posted by on

  • edmonton2 Aug 26, 2008

    it's still in load mode though I don't think it's trying to load as I hear no whirring sound. 


    I unplugged it and removed the casing. Everything very looks fine in there - the dvd  turns easily but the slider mechanism is firmly held in place and I couldn't see a way of removing dvd manually - short of disassembling the machine.
    Is there a some trick?
    MD?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DVD & Blu-Ra... Master
  • 19,396 Answers

Do the following

Unplug power cord.
Wait two minutes and plug it back.
Keep repeatedly pressing the eject button while you start the unit, before it starts reading cd inside. Do this a couple of times.
If you cannot eject the disk in this way you will need to take unit apart.
Unit won't start until the disk is inside, as it tries to read the disk , disk is faulty and unit get stuck.

Posted on Aug 26, 2008

  • Ginko
    Ginko Aug 28, 2008

    Now that you opened it clean lens with cotton and isopropyl alcohol.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG DVD recorder RH735T. Page 10 of the manual says to finalize a disc before you can play it on a different unit. But when I record something on a disc, the settings menu will not allow me to finalize


On my Toshiba DVD burners, you need to first open the DVD tray, and while it is open hit the regular menu, then DVD menu, select "FORMAT" from the DVD drop down menu, then "FORMAT MODE", which leads you to the 2 CRITICAL Choices :
1) Video Mode - Which has the DVD recording in "DVD Compatibility Mode" so it is "Compatible" with most other DVD Players
OR...
2) VR Mode- Which says "Editing Possibility mode" (Note you need a "+R DVD "to be able to do editing, at least on my machines.
Obviously you'll close the DVD tray to be ready to record
Finish the DVD, @ "DVD" Menu, & Finalize, or what you need with "VR"

Mar 02, 2014 | LG DVD & Blu-Ray Players

1 Answer

Tevion Dvd player won't read burned cd's or dvd's.


Transfer your .avi movie files onto a USB stick & simply plug them into the Tevion DVD player.
Select the usb button on the remote to activate & choose which film to play from the menu that pops up.
Good luck!

Mar 10, 2013 | DVD & Blu-Ray Players

1 Answer

PET941D/37 won't load dvd says no disc


Some DVD players are proprietary. See if it will play in other devices. If it is a burned copy the player may not like that brand of DVD.

Apr 23, 2012 | Philips PET941D/37 9 in. Portable DVD...

1 Answer

Zenith xbv343 dvd player / vcr combo. How to I get the picture back? It is stuck in the progressive scan mode


1) Remove and DVD that may be inside
2) Press & Hold "Stop" Button for a little over 5 seconds
3) Solved! DVD Player has reverted to Interlaced mode - You can now see your video!

Dec 22, 2010 | Zenith XBV343 DVD Player/VCR

1 Answer

My remote broke and im trying to get the codes for it for my dish network remote. Do you know them ???


Sorry to hear about the original remote, we would be happy to help with getting your DISH remote programmed to your Curtis DVD player. Here is a list ofcodes that should address your DISH Network remote to your Curtis DVD player: 678, 679, 683, 585, 592, and 594. Start by pressing and holding the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Curtis DVD player, thenpress the pound (#) button. If the code entered is valid for the remote, the modelight flashes three times.To check that the code works try several different functions on the remote tomake sure it will properly operate your DVD player. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 01, 2010 | Curtis DVD1047 DVD Player

2 Answers

Curtis DRC 8335 won't read the recorder DVD disks


Some DVD devices are not compatible with dvd +r or -r. The recoded dvd´s must be finalized if not they can´t be read by most dvd players.

Hope it help

Jun 25, 2009 | RCA DRC8335

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96683 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...