Question about Car Speakers & Subwoofers

1 Answer

Installation manual or wiringg diagram for pioneer car stereo. bought from a freind he didn't have manual

Posted by on

  • Anonymous May 03, 2009

    someone gave me an old pioneer car stereo, model KE 3838. it works but I don't know which wires go to which speakers? it is pretty old, it has a cassette deck not c.d.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Which model?

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I get the tools required to remove a kenwood kdc x679. The system was already installed in the car when I bought it and it didn't know with the removal tools mentioned in the manual.


at walmart you can buy a stereo removal kit for the tabs on the side of the stereo
or you can use a very thin flat tip screw driver and push it in the side while you try to pull out on the stereo

May 09, 2011 | Car Speakers & Subwoofers

2 Answers

I am lookin for the wiring diagram for a Pioneer DEH - 1150 MPG Stereo


dear small pau
download and go through it
you can see all the diagrams

http://www.pioneer.com.sg/storefront4/manual/DEH-1150MPG.pdf

Gagan Gupta

Mar 15, 2011 | Pioneer Car Speakers & Subwoofers

2 Answers

How do i install a pioneer radio without the instructions


Aftermarket radios have a standard wiring color set. Tell me the radio model and car year/model and I can send you the exact connection scheme.

Dec 01, 2010 | Pioneer Car Speakers & Subwoofers

1 Answer

My son installed my pioneer stereo inti my chevy tracker 2003, which as caused some electronic problems with my sensors. he did not have it grounded, so who knows what other mistakes there are? could you...


2003 Chevrolet Tracker Car Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: White
Car Radio Accessory Switched 12v+ Wire: White/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Yellow
Car Stereo Dimmer Wire: Red/Green
Car Stereo Antenna Trigger Wire: Pink
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): Black/Blue
Right Front Speaker Positive Wire (+): Blue
Right Front Speaker Negative Wire (-): White/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Light Green
Left Rear Speaker Negative Wire (-): Light Green/Black
Right Rear Speaker Positive Wire (+): Gray
Right Rear Speaker Negative Wire (-): Gray/Black

pls rate

Aug 16, 2010 | Car Speakers & Subwoofers

1 Answer

Pioneer DEH-1600 CD Player. Loose connection somewhere behind device as sound goes off and on when jarring stereo. How do I disconnect and pull out stereo to inspect. I have removed screws but stereo...


If the unit was installed with a cage (most likely if your car is an domestic) you will use two pioneer keys that are L shaped that came with your radio to remove it and it will slide right out. If it was installed iso din (if your car is an import) using the factory brackets the radio is screwed into the car you will have to disasemble the dash which varies depending on the vehichle. What kind of car is it?

Apr 22, 2009 | Car Speakers & Subwoofers

1 Answer

Pioneer deh-p3600 car stereo wireing diagram


need the wiring diagram for a pioneer premier deh-p360

Aug 17, 2008 | Car Speakers & Subwoofers

1 Answer

Got a new deh-6000ub and wire harness for honda accord dont know how to install the harness


You need an installation harness. You can get them at most anyplace that installs car stereos. Once you have the installation harness for your car, you just match up the colros of the wires on it to the same colors of the harness for the Pioneer. Make sure that each wire is insulated from anything by using some electrical tape and make sure they all have good connections. Strip away close to about an inch on each wire and then twist them together and then tape them good. After all the wires have been connected, all you need to do is plug the Pioneer harness into the Pioneer radio and then plug the installation harness into the factory wire harnees connector in the car. If you have any wires that do not match up in color, you can normally leave then not connected to anything, but make sure they are insulalted with electrical tape. Most all the wires should say what they are for. Matching the colors is the easiest way to do this.
Let me know if you need more help. I can always give you a detailed wiring of the Pioneer. I do not have the wiring diagrams for the car though.

Jul 20, 2008 | Pioneer Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...