Cut tv on and get tv rtail mode and no pic - Televison & Video

hello there it could be a loose connector that u may have disturbed or broken look again inside if it worked before with
sound the chances are its ok

You may have to go into service mode and change size, if you can't get it in customer's

Set the camera in TV mode, (delayed shutter mode) set the shutter at 15 sec, click to take a picture and during that 15 secs (like, after 7 seconds) open the battery compartment which cuts contact with the battery circuit. Close the battery cover. At this point the camera works fine ... but only temporarily.... Here is the key to the permanent fix. While the camera is working via the temporary fix, take many, many pictures. Hundreds! I probably snapped 400-600 pics. The idea is to wear down the little patches of hardened oil on the shutter blades. For the next three days I took hundreds of pics each day. Basically, I just aimed the camera at the wall or whatever and snapped off several hundred pics.

I HAVE A SONY TRINITRON KV-36HS510. IM HAVING A PROBLEM,ITS NOT SHOWING A PIC, AND BLINKING 7 TIMES THEN PAUSE FOR A COUPLE OF SECONDS THEN IT WILL BLINK 7 MORE TIMES,I CAN HEAR AUDIO BUT CANNOT SEE PIC. COULD YOU PLEASE HELP ME OUT ,I'VE TRIED CUTTING THE TV OFF FOR ABOUT 6 HOURS AND CUTTING IT BACK ON,SAME RESULTS, THANKS

I dont get any power

Check and see what type of lighting is selected. (Tungsten etc.) Adjust and see if that makes a difference.

Most likely in PIP mode. (pic in pic)

good luck tryin to find a universal remote i cant...but if you do there should be a button that might say something like pip, pix, screen mode something like that and it will make the picture streach to fit the screen however not all channles will be set on the same screen settings.

Repair the hyper module.... See some of the previous posts for this problem...
Bill

There are bad solder connections inside that should easily repaired. If you can solder, you can fix this yourself. Look for solder joints that appear grainy or have rings and resolder them.

Keep us posted.
Dan