Question about Washing Machines

1 Answer

Zanussi FJS 1225 error code e40, which states door is opened but door is closed and locked but we can't get the clothes out.

Posted by on

  • ckajh Sep 02, 2008

    Thanks ngfam1.

    I disconnected power and after a short while the door released and we could get the clothes out.

    Next day we tried the machine and it the wash cycle worked, just about, after a few attempts. I guess the locking mechanism is probably faulty but just about holding up. Not worth the hassle of a call out & repair now as:

    (1) machine has another problems with not starting the wash cycle, but does wash eventually, so going to buy a new machine as this is over 5 yrs.

    (2) I'm in the UK so can't really take up your advice.



    Thanks for trying



    Regards

    CK.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

DEAR FRIEND,
ngfam1 here for you!
I am happy to be of assistance!

You have only one choice!
Call service!!
Sorry!

If you ever need service in the future!
Here is a good service that I recommend to my customers,
in our 65 year old appliance business! they answer 24/7
Not expensive!

A&E Factory Service
1-800-905-9505 -(IN U.S.A.)
They are open to make appointments 7days/24hours
A&E is factory authorized service for most brands!
Including warranty work!!!
They will help you, and all will be well!

Good luck!
You will be fine now!

Thank You
Bless you,ngfam1
PS. PLEASE GIVE ME A GOOD RATING HERE ON FIXYA.COM BEFORE YOU SIGN OFF!

Posted on Aug 26, 2008

  • Neil
    Neil Sep 02, 2008

    ckajh
    LOOK FOR SPEED QUEEN, IF YOU WANT TO HAVE THE LAST WASHER YOU EVER BUY WITH THE BEST WARRANTY IN THE INDUSTRY!
    HOPE I DID NOT WRITE THIS TOO LATE!!!!!!!!AHUMDILLEELAH!
    THEY DO 8 LOADS A WEEK FOR ABOUT 25 YEARS STRAIGHT!
    3 YEARS PARTS AND LABOR AND TEN YEARS FOR THE TRANSMISSION!
    SORT OF A NO BRAINIER!
    BLESS YOU,
    SHOOKRAN,
    NGFAM1
    PLEASE GO IN TO FIXYA.COM AND GIVE ME A SOLVED RATING!
    I DID FIGURE IT OUT!!!!



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40


E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

1 Answer

Zanussi Washer Dryer wont wash!


Sounds like the switch that tells the controller that the door is closed and locked is actually bad or the plastic molded part holding the switch is broken. Inspect the interface for cracks.

Nov 22, 2014 | Zanussi Washing Machines

1 Answer

Zanussi washing machine zwf14581w . err e40


Hi from retired Englishman in SW France,

Zanussi's 'E40' states 'door open, interlock, wiring or main PCB'. Hopefully it is just a problem with either the door solenoid/lock or the 'door closed' sensor requiring a service engineer's attention.

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Aug 20, 2011 | Zanussi FJ1454W Front Load Washer

1 Answer

Have just bought a zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away. Is this because it was a quick wash? V disappointed as I need a...


zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question. And don't forget to like us on facebook

Feb 15, 2011 | Zanussi FJS1225W Front Load Washer

1 Answer

My zanussi washer dryer keeps flashing E40 whenever I try and do anything


can be faulty door lock or wiring to the lock. also door ****** can be displace in the door . the handle shaft can slip out this stops door closing and actuating the switch correctly.e40 relates to starting the machine with door open.

Aug 03, 2010 | Zanussi Washing Machines

3 Answers

Error codes for Electrolux front load washer EWF 1087


E40 error is door interlock faulty, could be the lock or it could be the pcb u have to test them.

May 21, 2010 | Electrolux EW1000i Front Load Washer

2 Answers

I put on a load of washing and it stops half way through the machine flashes E20 n just stops the machine is a zanussi jetsystem zjd12191


Hello,

Error code E20 relates to the pump/filter blocked.Drain the water either manually through the filter or drain hose.Check that filter is clean and pump can turn by hand.

Hope this helps.

May 19, 2010 | Zanussi FJS1225W Front Load Washer

2 Answers

Zanussi Washing Machine Troubleshooting, Problems BY EORR E40


E40 is code for the door being open. Try closing/slamming the door hard a few times

Oct 09, 2008 | Washing Machines

1 Answer

Error`E40


hi there e40 fault is a problem with your door interlock. get it replaced and all will be fine..

Feb 28, 2008 | Zanussi ZWD1470W Front Load Washer / Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...