Question about Linksys Wireless-G WRT54G Router

1 Answer

I dont know the password

What if i dont know the password or username for the http://192.168.2.1 thing?

Posted by on

  • jaybob44 Jan 03, 2009

    After about six power failures and reboots, I am now being asked for a password and I have never even had a password. I cannot now connect my WiFi iMac to the internet.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

Leave the userid blank. The password is admin. If this doesn't work hold in the reset key on the back for 5 seconds and it will restore to factory default settings.

Posted on Aug 28, 2008

3 Suggested Answers

eastpole
  • 22 Answers

SOURCE: set up router/modem as instructed

Problem can't be solved as described, a fixer would need more details.

What kind of modem/router is it?
What instructions are you working from so far (you say, "as instructed" so I take it you're looking at a Quick Start Guide of some sort?)
How are you connected to it?
What http address are you going to (E.g. some routers use 192.168.1.1, others 192.168.1.254 or various alternatives)
What happens when you enter that address on a browser?
Have you set your computer's address to a nearby address so it can talk to the route?

If I had one guess with not enough information, I'd say you need to set your PC to an address one different from the target you're going to.

( http://compnetworking.about.com/od/workingwithipaddresses/g/192-168-1-254-d.htm )

Posted on Jan 10, 2011

bhushan_soft
  • 14 Answers

SOURCE: 192 168 1.1 requires a

enter router company name and model number for default username an password in google u will get it.
But if default password is changed then
u can reset it also manually or by command.

Posted on Feb 18, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to get into my facebook i dont know my email or username or password


Even after forgetting your Email address, Username or Password of Facebook account, there is one method to try. First thing, you need to submit a report to Facebook so that they can refine the 'Account Finder' tool to search for related information about your Facebook profile. Also sometimes it won't necessarily help you access your account.
To help you further, please follow the instructions mentioned on the link given below:
http://www.ehow.com/how_12299298_facebook-forgot-everything.html

GuruAid.com

Apr 22, 2016 | Facebook Computers & Internet

1 Answer

I was given a computer with windows xp professional the username always says exec but i dont know the password. how can i get into it?


Hi Ashley,

There is one way... SAFE MODE! (Got to love Safe Mode)

http://www.davidtan.org/hacking-cracking-windows-xp-login-password/

Hacking Windows XP Login Password 1. Restart your computer and keep pressing F8.
2. From the menu, select boot in safe mode with command prompt.
3. once you're at the command prompt, type "net users" (without quotes)
4. You will see a list of usernames. Pick the username that you are using and type "net users username *" (without quotes, replace username with a real username from that username list)
5. You will be asked to enter a new password and a second reconfirmation.
6. Press enter and you will be told that your username password has been changed successfully.

Sep 28, 2015 | Computers & Internet

1 Answer

I cant log in my wireless device dlink on http://192.168.0.50/ i want set the password and i cant


the first time you access http://192.168.0.50 it will ask you for username and password. Type the default username and password. If you don't know try one of these:

Username: admin
Password: password

Username: admin
Password: No password (just hit enter after you type the username)

Username: admin
Password: admin

Dec 07, 2012 | D-Link Dlink Airplus Xtreme Dwl-2100ap...

1 Answer

Username and password for dlink Im trying to set


If you are trying to access the router itself via it's IP address (192.168.X.1) where X is usually 0, 1 or 2...
The username and password should both be admin
if not, try no username with admin as the password, or try admin as the username with no password.

Jul 11, 2011 | D-Link DIR-300 Wireless Router

2 Answers

How to recover the password for 198.168.1.1


You will need to reset it then it will come to default
password. unplug power cable then while powering on press the reset button simultaneously.
ok
A user name and password prompt will appear. Type in admin (lower case) for the username and password. The username and password admin are the default username and password of TP-LINK Routers.
ok link
http://www.tp-link.com/support/showfaq.asp?id=10

Jan 07, 2010 | Computers & Internet

2 Answers

Don't know the username to "http://192.168.0.1" router Level One.


If you have never changed this from default then the user name will be "admin" & the password will be "password" or "admin. If you google the default password for Your router model then that shoud find it if this does not work. Don't forget to rate me if this works for you.

Jul 06, 2009 | Levelone CP Technologies LevelOne FBR-4000...

1 Answer

Locked out of laptop :(


If You just installed Ubuntu and forgot what password you selected during the installation process or one of your friend gave you ubuntu computer without giving username and password.This tutorial will help you to recover username and password

1) Turn on your computer, and as soon as you the Press Esc to enter grub message, press the escape key.
2) Select the option that says (recovery mode).
3) Your PC will boot into a shell. Once you get a command prompt, type “passwd username” where the username is your username. If you can’t remember your username, then you can type “ls /home” which should bring it up.
4) Enter a new password when prompted, and again when prompted again Type “shutdown -r now” to reboot your system,
That’s it. You should now be able to login with your new password.

Jun 02, 2009 | IBM ThinkPad T20 2647 Notebook

2 Answers

New laptop want to connect but forgot key


what you want exactly?password for what? username and password for internet in subscriber? or just WEP for wireless key password?
if you forgot the password for username and password for subscriber....theres an option,i dont know what kind of subscriber do you have in your country...if you forgot the username and passowrd you can ask in the subscriber.
regarding in the WEP password for wireless,it doesnt matter,try this..
type 192.168.1.1 in the internet toolbar
username:admin
password:admin
and you can see the configuration,check the wireless settings for WEP...

Jan 04, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Dynamode BR-6004 W G1


Try holding down the reset switch on the back with the router turned on for about 10 seconds or more.

the following info was found at http://www.help2go.com/component/option,com_forum/Itemid,32/page,viewtopic/p,126642/

i believe the default password/username for your router is:

username:guest
Password:guest

www.portforward.com wrote:
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are guest. Click the Ok button to log in to your router.


this info was taken from
http://www.portforward.com/english/routers/port_forward ing/Dynamode/BR6004W-G1/WinMX.htm

Mar 15, 2008 | Dynamode (HT809STP) Networking Hub

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...