Question about Midland Amateur&Consumer Radio Replacement Batteries: 70B-75.....1400 mAh 7.2V NiCD

1 Answer

Uniden hr2510 10 meter lights up, won't transmit or receive

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 109 Answers

Have you tried a different michrophone. If you have then the radio will have either a cold solder joint on the main board or a transister has gone bad. The unit will require service at a local radio shop or send to Uniden Service center.

Pat N5SLI

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should i look for if my uniden presiden jackson cb back light on meter lights up but has no led on channel display, and no transmit or no receive


Check to make you are not on PA.Make sure the radio is on. there are diodes controling the lighting for the display.

Apr 01, 2016 | Uniden Radio Communications

1 Answer

A uniden Madison base station with digital clock that transmits and receives but has no modulation


could be your final , could be the modulation transformer, could be your coax, could be your mic. Hows the SWR . under a 2.0 I hope.the smaller the # the better you get out .

Oct 25, 2015 | Uniden Radio Communications

1 Answer

Why no modulation in transmit mode?


Without seeing it I would guess (and it's only a guess) that maybe you have a broken microphone wire. If it's a factory mic the most common place for it to break is right up from the mic plug. Factory cords are not flexible, their really stiff. We could really use some more information. Mike

Oct 15, 2015 | Uniden Radio Communications

1 Answer

What's up I have a uniden Washington no sound out of the speaker but it is receiving you can tell by the s meter moving.?


do you have the volume turned up? Squelch turned all the way left and RF gain all the way right. If you still don't hear anything check to see if this model has a dynamic squelch .If it does turn it off.

Sep 30, 2014 | Radio Communications

1 Answer

My radio will not transmitt but it receives just fine


Most problems with radios that receive but do not transmit are antenna or antenna wire/connector issues. It's easy to receive with a marginal antenna but transmitting requires a good working antenna. If you have a SWR meter or can get your hands on one, install it in line with the antenna and test for reflected power. Of course, make sure your TX light comes on when you depress the mic switch. If not, switch mic and try again.
Hope this is helpful! Reply if u can.

Oct 06, 2012 | Uniden Solara DSC VHF Marine Radio

1 Answer

My uniden ltd 715 receives from my handheld but when I transmit to handheld it just buzzes.


Just to clarify something, you say that your hand-held VHF can receive a clear transmission from the Uniden, now which of the radios are buzzing, the Uniden or the HH?. If it's the hand-held buzzing try transmitting on the low watt on the Uniden, get some distance from the radio, because if the hand-held are to close to the on the Uniden on high watt you will get a buzzing, the signal are overpowering the receiver of the hand-held, try getting the minimum of 30 feet away. Good luck.

Mar 24, 2011 | Uniden Solara DSC VHF Marine Radio

1 Answer

Uniden pc78elite antenna light


What kind of antenna is it? Have you checked your standing wave? To do this process you will need a field strenth or a SWR meter to do it,would be cheaper to have it checked at Radio Shack or you can buy one,and do it yourself. Some radio antenna light come on when transmitting,....hope this helps....

Mar 15, 2010 | Uniden PC78ELITE 40-Channels Base CB Radio

1 Answer

Pc78elite won t transmit but receive is ok


Have the SWR's ever been checked on this radio when it was installed? where they over 2 or higher?

Most likely the final transmit transistor is bad from too high of an SWR.


Feb 22, 2010 | Uniden PC78ELITE 40-Channels Base CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Steve

Level 3 Expert

3287 Answers

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...