Question about Zanussi Dishwashers

1 Answer

I have a Zanussi Dishwasher DW907 age 10 years. The PROGRAMME SELECTOR DIAL became very stiff to operate,to start washing cycle, finally something seemed to snp and Dial now moves freely but not operating the programme of washing. Where can I obtain a replacement Dial and correct the Dial movement? I live in Ombersley, half way btween Worcester & KKidderminster.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

DEAR FRIEND,
ngfam1 here for you!
I am happy to be of assistance!

ITS 10 YEARS OLD!
IT IS A WASTE OF MONEY TO FIX IT!
THE NEW ONES TODAY ARE 10 TIMES MORE ENERGY EFFICIENT AND WILL SAVE YOU MONEY!
AND THEY WASH 10 TIMES BETTER THAN THE OLD DIAL
TYPE WHICH USUALLY HAS A TOWER SPRAYER IN THE MIDDLE!

TO GET A GOOD ONE TRY TO STAY AT $399 - 499.
WHIRLPOOL OR FRIGIDAIRE! HAVE THE LEAST REPAIRS!
DO NOT SHOP BY PRICE ALONE!
THE CHEAPEST DISHWASHER IS THE BUILDER MODEL ONLY USED AS A LEADER TO ATTRACT PEOPLE IN TO THE STORE! YOU DO NOT WANT THIS!!!!!!!!!!!!!

IF YOU DECIDE ON REPAIR!???????????????????
Here is a good service that I recommend to my customers,
in our 65 year old appliance business! they answer 24/7
Not expensive!
A&E Factory Service
1-800-905-9505 -(IN U.S.A.)
They are open to make appointments 7days/24hours
A&E is factory authorized service for most brands!
Including warranty work!!!
They will help you, and all will be well!

Good luck!
You will be fine now!

Thank You
Bless you,ngfam1
PS. PLEASE GIVE ME A GOOD RATING HERE ON FIXYA.COM BEFORE YOU SIGN OFF!

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi dishwasher ZDF601M 1 in 3 red light comes on and programme doesn't work through


26269906-aipk5px1bmfkdpsmrgevaqwn-3-0.jpg "3 in 1" function
This appliance is equipped with the "3 in 1" function, that
allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1" function before the set of a washing
programme.
Once this option is selected (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function
can NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the "3 in 1"
function.
In this case you have to set a washing programme (and
options) again.

Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the
indicator lights of function buttons 1, 2, 3 and 4 start
flashing.

3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

Dado

Aug 29, 2016 | Zanussi Dishwashers

1 Answer

Electrolux dishwasher


Hello - The issue may lie with the door latch; a door switch is used to start and stop your dishwasher. It's a safety feature that won't allow water to flow with the door open. With a faulty door switch, there is a chance your dishwasher won't start at all. Dishwasher door switches are about an inch long. They are usually black but can be red. There are metal prongs on the body of the switch called terminals. Some door switches have two terminals and some have three. If your door switch is OK, check the timer assembly. This controls when and how long power is sent to other controls on your dishwasher. If these controls don't receive power, they won't work. The timer assembly contains a motor. Check this motor as well. It is often cheaper just to replace the timer motor rather than the complete assembly. My last suggestion is to check the cycle selector switches. These switches indicate cycles for washing, drying, and setting the temperature of the water. If one of your switches is the problem your dishwasher may not start. Dishwasher cycle selector switches tell the timer which cycle to run by opening and closing electrical circuits. Most selector switches are six to eight inches long. They are usually black and have terminals. By testing each one of these parts with an ohmmeter you should be able to determine why your dishwasher is not working. It is possible for other parts to fail but these are the most common parts to check. If any proves to be ineffective, I strongly suggest contacting a professional to move forward accurately.

Nov 05, 2012 | Electrolux 24 in. ESL4125 Dishwasher

1 Answer

ADG7540 wont allow me select all wash programmes. Unable to select final two programmes.


Most likley the contacts on the buttons or dial are gone and it does not see the request for the cycles

Sep 06, 2012 | Whirlpool 24 in. ADG7540 Built-in...

1 Answer

Dishwasher stuck in cycle


Hi

I have a similar problem, did you find the cause of the problem?

Geoff

Jan 13, 2010 | Dishwashers

1 Answer

The dish washer is taking ages to wash and it not clean ing dishes well


ok so If your dishwasher has worked fine in the past but, suddenly, your dishes aren't clean after the dishwasher completes all cycles:
1) Check your water heater's temperature dial to be sure it hasn't been changed recently.
2) Be sure dishes haven't prevented the detergent dispenser from opening properly during the wash cycles or kept the spray arms from turning, the lower arm from rising, or the spray from reaching the upper rack's dishes.
3) During the wash cycle, listen to the spray arm spinning inside. If it seems to be spinning poorly, clean out the spray holes in the spray arm(s) with a stiff piece of wire; wait for the machine to cool, and then remove the spray arm(s) by unscrewing the hub cap and lifting the arm(s) off
Regards Gizokieth

Sep 10, 2009 | Dishwashers

1 Answer

Dishwasher stuck on wash cycle and water does not heat up


The element that heats your water may be bad or the control panel(board) could be bad as well. If your machine is older than say 10 years old, it probably is the board. If you can, check the element by feeling to see if it is rusted through or has a rough feel to it in any particular area. The signal telling it to go into the rinse phase is an indication the the board is bad. Is it still under warranty?

Dec 13, 2008 | Zanussi 18 in. DE4744 Free-standing...

1 Answer

Zanussi DW907 Dishwasher stops early in cycle


the heater relay may have gone on the pcb or you may have a stat/wiring fault in the heater circuit.

Feb 15, 2008 | Dishwashers

2 Answers

Zanussi Aquapulse DE6544 not emptying


Zanussi Aquapulse dishwasher - is filled with water inside, is not washing and the lights keep flashing on and off - has anyone any idea what may be wrong with it?

May 27, 2007 | Zanussi 24 in. DE6544 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

paulcarew

Level 3 Expert

1914 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...