Question about Dryers

Open Question

Kenmore gasdryer sorry, have replaced the start button, the electronic panel......i see the next step is the reistor so thats my last try. if that doesnt work, no ideas

Posted by on

  • Corrie Reinhart
    Corrie Reinhart Aug 26, 2008

    anyone have any other ideas?

×

5 Suggested Answers

heatman101
  • 43501 Answers

SOURCE: my kenmore gasdryer wont

Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer2_bing.gif will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

Posted on Aug 12, 2010

heatman101
  • 43501 Answers

SOURCE: kenmore 90 series won't start timer ticks

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Posted on Sep 29, 2010

  • 3069 Answers

SOURCE: I need help. Our dryer control currently works and

maybe the motor for the dryer, is this a even heat? if so here is a website:

http://fixitnow.com/wp/2009/03/17/easy-fixes-for-two-common-problems-with-the-whirlpool-even-heat-dryers/

if not an even heat here is another website:

http://www.partselect.com/dryer+dryer-wont-start+repair.htm

Posted on Dec 26, 2010

  • 3069 Answers

SOURCE: Kenmore Elite HE3 model 110-84832

door switch???? here is a website that may help:

http://www.partselect.com/dryer+dryer-wont-start+repair.htm

Posted on Mar 04, 2011

heatman101
  • 43501 Answers

SOURCE: I have a kenmore dryer

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Posted on May 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Elite Electric Dryer -- Diagnostic for electronic control "Start" touchpad is 09. What does it mean?


i donot know what 9is but i think its the moter switch or moter try switch first

Jul 19, 2013 | Kenmore Dryers

1 Answer

How do i get the control lock button to turn off?


There is a button on the control panel with a marking under it that says "Press and hold for 3 seconds to lock/unlock control". Look for the said button then press and hold it for 3 seconds or until the control lock light turns off. The button is usually the Auto Dry Level button for Kenmore Elite dryers and the Drain/Spin button for Kenmore Elite Washer. Whirlpool Duet Washers and Dryers use the End of Cycle Button to lock and unlock the control.

Sometimes the problem is due to electronic glitch and unplugging the machine for at least 30 minutes may solve the problem. But if the control cannot be unlocked by pressing and holding the button specified above or by unplugging the machine, the control panel electronics may need to be replaced.

Dec 21, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Dryer will not heat


Does the limit switch have a reset button on it or is it an auto reset? Have you tried depressing the reset button on it if it is a manual reset? Have you checked your voltages to the gas valve, ignitor to make sure they are being called to come on? Trace your electrical connections from your electronics to these items. If they are not being told to come on, then you know it is the electronics. Also, have you checked the continuity of the door switch, and the ignite? These are all suggestions that must be ruled out before replacing parts.

Apr 18, 2009 | Kenmore 63942 Dryer

1 Answer

Sears elite he dryer stopped working


Bad control panel. Replace the control panel at repairclinic.com. When your control panel clicks like that it means that a resistor or solder joint has gone bad and it is cheaper and easier to just replace the board

Feb 19, 2009 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite HE4 Gas Dryer-triple beep


Did you have any lights at all on the panel? I just took off the User Interface as going through the troubleshooting guide I found underneath the control panel led me to that solution.

Feb 11, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Oasis Dryer Model 7704 F 2 Error


after haveing read through some blogs here, the F02 code is either a short in the interface board or the ribbon is loose. I'm having a similiar problem, mine started beeping all by itself, when it was not even turned on, am presently running a load through and is doing fine so far, also, I had unplugged the dryer last night, not sure if that helped but so far is working properly, other advise I read was to make sure the ribbon was seated properly, next step for me will be to do that then order the part (?), sorry I can't be more helpful

Nov 20, 2007 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...