Question about Alcatel Newbridge MainStreet 3612 Multiplexer

Open Question

Newbridge MainStreet mux 3612

Hi

I am having problem connecting the laptop to the Newbridge Mainstream 3612 mux, I have a spare mux and I know the laptop talks to the mux but the one on site does not seem to want to talk. Tried change the rate and Parity but no good. Is there anything else I need to try?

Thank you

Posted by on

3 Suggested Answers

SOURCE: Alcatel Mainstreet 3600 Anphenol PINOUT

You must have a Dual E1 card that support a 120 ohm interface. There are cards for 75 and there are cards for 120 ohm. Sergio - Argentina

Posted on May 23, 2007

  • 1 Answer

SOURCE: Newbridge 3612

yes, you can shut down and relocate with no adverse affects.

Posted on Aug 04, 2008

brizuelaluis
  • 1 Answer

SOURCE: Need 3612 mainstreet j8 pinout configurations

DB9 -----------------------------------> RJ45 1 ---------------------------------------> 8 2 ---------------------------------------> 4 3 ---------------------------------------> 3 4 ---------------------------------------> 7 5 ---------------------------------------> 5 6 ---------------------------------------> 6 7 ---------------------------------------> 1 8 ---------------------------------------> 2 9 ---------------------------------------> NC
If not work, invert the RJ45 connector

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have a problem. I just wanna know how Newbridge 3600 series multiplexer help me extend telephone lines to a remote areas like Oil & Gas Pump Stations. I have STM 64 mux used as a backbone. So...


Hi Berido, you can extend telephone lines over the 3600 by using LGE and LGS cards fitted with a ringer PSU in the 3600 at the end point, works well, for more info send me a mail, lenconradie@yahoo.com

Sep 08, 2011 | Alcatel Newbridge MainStreet 3600...

1 Answer

We connect 8 analog lines to a 3612 on one end compressed lines to 16 k each accross a data circuit then break them back out on a 3612 on far end. Calls will be up for a minute or 2 then drop. Call...


There are many reasons why the call will be dropped. The call will be dropped when you aggregate link between the nodes fails, if this is not the case monitor the connections on the node and see if the connections stays up. If I would guess it could be the PABX that is dropping the calls and not the nodes.

May 23, 2011 | Alcatel Newbridge MainStreet 3600...

1 Answer

Need 3612 mainstreet J8 pinout configurations DB9 to RJ45


DB9 -----------------------------------> RJ45 1 ---------------------------------------> 8 2 ---------------------------------------> 4 3 ---------------------------------------> 3 4 ---------------------------------------> 7 5 ---------------------------------------> 5 6 ---------------------------------------> 6 7 ---------------------------------------> 1 8 ---------------------------------------> 2 9 ---------------------------------------> NC
If not work, invert the RJ45 connector

Mar 03, 2010 | Alcatel Newbridge MainStreet 3612...

1 Answer

No connect to rs232 serial, ports PC


df1c50d.png This is for a newbridge or alcatel 3624 mainstreet channelbank - do not use the modem side, only use the terminal side - all is needed is Rx, Tx, and ground - if looking from the "window" side of rj45 connector, or pins-side up on rj45 socket.

Aug 18, 2009 | Alcatel Newbridge MainStreet 3600...

2 Answers

I need the pinout for the serial cable? RJ45 to DB9


f211598.png This is for a newbridge or alcatel 3624 mainstreet channelbank - do not use the modem side, only use the terminal side - all is needed is Rx, Tx, and ground - if looking from the "window" side of rj45 connector, or pins-side up on rj45 socket.

Aug 03, 2009 | Alcatel Newbridge MainStreet 3612...

2 Answers

Can u tell me function of DSP , LGS CARDS IN 3600


LGS is same with FXS (Foreign eXchange Subscriber) card. It's voice card for serving voice needs with 2 wire connection. A analog phone connect to LGE on alcatel 3600 and other analog phone or PBX on remote alcatel 3600.

Look the others card e.g LGE (FXO) and E&M card.
DSP card processed the voice.

thanks

Feb 26, 2009 | Alcatel Newbridge MainStreet 3600...

1 Answer

NewBridge 3600 Mainstreet


Hello

The pinout is determined by the serial port you are plugged into. Are you using serial port 1 or 2. This is pinout from a standard DB9 PC serial port should get you into SP1.

Blue-8
Orange-7
Black-2
Red-3
Green-5
Yellow-4
Brown-6
White-No Connect

Write back and let me know - BAD421

Aug 01, 2008 | Alcatel Newbridge MainStreet 3600...

1 Answer

Newbridge 3612


yes, you can shut down and relocate with no adverse affects.

Apr 28, 2008 | Alcatel Newbridge MainStreet 3612...

2 Answers

Connect 3600 Alcatel over IP network


You can use some external TDMoverIP box to carry the E1's over an IP network

Apr 25, 2008 | Alcatel Newbridge MainStreet 3600...

2 Answers

Alcatel Mainstreet 3600 Anphenol PINOUT


You must have a Dual E1 card that support a 120 ohm interface. There are cards for 75 and there are cards for 120 ohm. Sergio - Argentina

Apr 04, 2007 | Alcatel Newbridge MainStreet 3600...

Not finding what you are looking for?
Alcatel Newbridge MainStreet 3612 Multiplexer Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alcatel Concentrators & Multiplexers Experts

Len Conradie

Level 1 Expert

20 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you an Alcatel Concentrator and Multiplexer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...