Question about Belkin N1 Wireless USB 2.0 Network Adapter (S6359026)

1 Answer

Belkin N1 connection problems

My N1 Belkin just won't stay connected to the internet more than a few minutes at a time. I've tried to use the upgrade button but most of the time it is greyed out. When it isn't and I try it, it will automatically disconnect my connection. I didn notice that a few of my neighbors are on wireless now. Does that make any difference? Before they were on, I had no problems. I am sooooo frustrated!

Posted by on

  • 1 more comment 
  • persimmonsky Nov 02, 2008

    Thanks pal! Worked like a charm!

  • Anonymous Nov 20, 2008

    i try all the one is working only is chanel 11 ,and it stay only for a few moment . i try every thing eles . please help



  • Anonymous Nov 25, 2008

    my computer sometimes will let my go onto the internet and sometimes it wont.like now it wont. it will let me view my hompage sometimes by wont let me move from there. i cant find anything to fix it!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Its nothing 2 do with ur adapter  change ur wireless channel in ur router 2  manual 2 a stronger channel to 9,7,11

Posted on Nov 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My belkin adapter can usually connect to the internet just fine. When i try to use the internet, however, it has been losing connection after a couple minutes or when it is being used heavily (downloads...


The first thing you should try doing is checking Belkin for any upgrades for either Drivers or Firmware. I'd definitely reinstall the driver. I would also try switching usage between Windows having control over the adapter and Belkin's connectivity software.

Apr 22, 2010 | Belkin Wireless-N USB 2.0 Adapter

1 Answer

Not satying connected


Try using the Window built in connection utility. Open up the belkin softwar, click on the 3rd tab and select, use windows. See if that works

Jun 04, 2008 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

Belkin n1 wireless usb adapter


Dear Friend,

1. Connect your ISP modem to your PC and configure as Bridge mode.

2. Remove your ISP modem and connect your wireless router to your PC and configure as PPPOE mode. (refer http://www.wi-fiplanet.com/reviews/article.php/3645166 if any doubt on configuration)

3. Now connect your ISP modem to wireless router, The modem should connect to your WAN cable.

4. And Give the wireless router's IP in your laptop as Gateway (In TCPIP settings of your Laptop wireless adapter / or configure DHCP)

5. Now you can access internet on both systems.

Feb 02, 2008 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

Belkin N1 Wireless USB Adapter


Hi Emma,
Try these first:

change channels to 1-6-or 11. Make sure you change all of your wireless computers.

check is to make sure you are NOT using "IEEE 802.1x authentication for this network."

You can find at setting under "Wireless Network Connection Properties" and then under "Authentication" tab of your network properties.

This particular authentication method is periodically logging you off the network and re-authenticating.

Check the adapter in device manager to make sure that windows is not shutting the adapter down to save power.

Cordless phones1.gif and wireless ethernet cards use overlapping frequencies.As a test, you can unplug the AC cords from all the cordless phones in the area and see if it helps.
Please let me know how you make out.
thanks

Jan 21, 2008 | Belkin N1 Wireless USB 2.0 Network Adapter...

2 Answers

Belkin N1 Wireless not STAYING connected


change channels to 1-6-or 11. Make sure you change all of them.

Jan 07, 2008 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

Wireless USB adaptor not found


Hi zlyman, The Belkin N1 Wireless USB 2.0 Network Adapter might be choosy with what motherboard it is attached to. Pls refer to this similar problem > http://www.fixya.com/support/t201253-not_identify_belkin_n1_wireless_usb Hope this be of some help/idea. Post back how things stand or should you need further information. Good luck and kind regards.

Oct 02, 2007 | Belkin N1 Wireless USB 2.0 Network Adapter...

2 Answers

Can not identify Belkin N1 Wireless USB Adaptor on PC


Hi, A couple of things: 1. Have you tried all the USB ports of your desktop PC (front and back)? 2. What is your desktop PC brand/model or at least the motherboard? and What OS please?; 3. If running Windows in the desktop PC, can you please check in your Device Manager if your USB are 2.0? 4. Are you using a USB hub or directly connected to the PC's USB port? Hope this be of some idea/help. Pls post back with your desktop brand/model/motherboard. Good luck and kind regards.

Sep 16, 2007 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

Belkin N1 Wireless Adaptor not connecting on PC


what the adviser meant was your pc cannot provide enough power to the usb port to power the unit, assuming you have tried other ports and it still wont work; you will need to either purchase a pci usb 2.0 card adapter or purchase a mains powered usb hub and connect to this instead.

Sep 15, 2007 | Belkin N1 Wireless USB 2.0 Network Adapter...

Not finding what you are looking for?
Belkin N1 Wireless USB 2.0 Network Adapter (S6359026) Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...