Question about Whirlpool Washing Machines

1 Answer

Hi, I need a parts diagram for my washing machine, which has developed a leak. It's a Whirlpool AWM 1200/1 and the part I need is a rubber grommet type thing in the water fill part behind the dispenser tray. If I can see a diagram, I can make up a part. Many thanks, Peter.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Dear chopper667,
ngfam1 here for you!
I am happy to be of assistance!
You said, it's a Whirlpool??
USA????????
I tried looking this model up to get you the diagram but this is not the correct model # awn 1200/1or the machine is ancient?????????


Go to whirlpool.com and you can find the owners manual and all you need in there to download!
If you decide on service!
Here is a good service that I recommend to my customers,
in our 65 year old appliance business!

A&E Factory Service
1-800-905-9505 -(IN U.S.A.)
They are open to make appointments 7days/24hours
A&E is factory authorized service for most brands!
Including warranty work!!!
They will help you, and all will be well!

Good luck!
You will be fine now!

Thank You
Bless you,ngfam1

Posted on Aug 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Whirlpool 1200 Spin AWM 1201 Washing Machine. There is a funny smell coming from it like suage. Also sometimes there is water on the floor after its use. We have checked the pipe going outside and...


The smell is a build up of bacteria which can be flushed out to help/ The leakage could be a few things a hose , pump or door boot seal ,a small rip in this you need to check further....

Feb 22, 2011 | Whirlpool Washing Machines

1 Answer

Hi, my AWM 1200 is 9yrs old but still washes and


Your machine most probably has had water in the spin bearing. The seal has worn and allowed water to rust the ball bearings which are no longer smooth...Hence the noise! A fairly major job which could also need a new shaft and inner drum. Get quotes, but be prepaired. Too much detergent can also speed up seal failure......Good luck....Nomess

May 13, 2010 | Washing Machines

1 Answer

AWM 8143 front loader- rubber door needs to be replaced


Yes,it is called a bellow.If the tear is small enough and just on the front rim of the seal try gluing it with super glue,it will get you by till you can get it replaced.

Sep 07, 2009 | Whirlpool AWM8143 Front Load Washer

1 Answer

Leaking water from a whirlpool AWM - 293 front loader


I too have this model machine. The leak in my case traced to the fill up hose that attaches to the drum. The seal at this point seems to be a weak point and requires either a replacement that will only last another couple of years or you could try what I did.

I removed the rubber hose from the drum. Dried and cleaned it thoroughly. placed a fair bit of sealant (silcone) on both parts and reassembled and let sit for a couple of days till it cured. This will need to be redone in about 3 years (that is my average- have owned it for 10years).

Jul 26, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool awm 8000 washer leaking from front door.


the rubber door seal needs replacing.you can get them from appliance repair shops easily.

Jun 21, 2008 | Whirlpool Washing Machines

1 Answer

Washing machine rubber door seal replacement


Go to www.Searspartsdirect.com You should be able to find an exploded view and parts list

Feb 28, 2008 | Washing Machines

1 Answer

How to remove Bra wire trapped between drums.


Try to see if there is a large rubber sleeve underneath that you can remove. It will probably be fastened with a clamp. Make very sure that you get it tightened afterwards, or it may leak.

Dec 05, 2007 | Whirlpool AWM6120 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...