Question about Car Speakers & Subwoofers

1 Answer

I have a jensen car dvd player. the model number is vm9510ts. the problem is that i when i insert a dvd all i get is a blue screen. i wanted to know is there a bypass code that i can enter to stop this

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

No - I've seen about a million people on here asking about a bypass code. They don't exist. What you have to do is take the peach-colored wire in the harness and run it to a ground (find a screw installed into the metal framework inside the dash), and put a switch on the wire, so you can break and reconnect the connection at will. Normally you'll leave the switch closed (activated, toggled, so the ground connection is made).

When you want to watch a DVD, put in the disc. When the blue screen comes up, flip the switch off, wait 3-5 seconds, and flip it on again. The movie will come up, and you'll get to drive away with your movie playing.

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jensen jdvd-7700 keeps on loading nothing happens


contact jensen sounds like a faulty dvd player if still under warranty they should fix it for free

Feb 25, 2013 | Jensen Car Speakers & Subwoofers

1 Answer

How to i install a Pioneer DEH-1250 to a Jensen 5500?I got these as a gift and its like confusing me.Please help me out and send me a diagram on the input wiring from the Pioneer player to the Jensen 5500-...


Hi, what you want to do is just connect the speaker wires from the head unit straight across to the pre-amp inputs of the amp. If you have a sub, also connect the pre-amp outputs of the head unit to the 2 sub inputs of the amp. Connect the blue wire of the head unit to the turn-on terminal of the amp and connect power wires to both units. May I ask what speakers are you using?

Aug 14, 2011 | Jensen Car Speakers & Subwoofers

1 Answer

Jensen DVD player (JDVD 4301) does not show picture when DvD is inserted. Message on screen "Warning Stop Watch Video" display on blue screen although I can hear the movie playing. Did I connect...


Jenson requires the green wire to be connected to the vehicle parking brake.(Safety feature) this green wire requires a negative switch to activate the screen.

Jul 29, 2011 | Car Speakers & Subwoofers

2 Answers

What is the parking/ emergency brake code to bypass the jensen uv10 dvd player


uv10 radio dvd player all you have to do find the wire on the back uv10 radio and ground it..( parking brake wire)

Jan 31, 2011 | Jensen Car Speakers & Subwoofers

1 Answer

I have the unit hooked up i can hear the cd and the radio but the display only shows a blue screen if i go to the set up screen and hit the back buttom i can see the display for the cd and or the radio...


All I could find out about this problem, is that the screen's reverting to "stow-away mode". It could be doing it because of a problem with the touch screen (intermittent sensor connectors). The screen is TFT, and can also have damage if bumped, but from what I've read about these type of problems, it's often the touch sensor connection in the display. There are YouTube Videos about repairing touch screens, and I saw a couple on the ipods, which is a similar system. It's quite a process, but can be done with disassembly and a heat gun. Your problem could also be a slightly loose ribbon connector, with just enough intermittence to default the cpu to the stow-away mode. If the reset isn't working, it's either the screen or a ribbon connector, and those are easy to reseat, after you get the unit apart.
If you do get it serviced, get an estimate first. Then you'll know whether or not you want to try it yourself, or go another route.
Good luck, and hope this helps.

Jul 04, 2010 | Car Speakers & Subwoofers

1 Answer

My code for my cd player in the car is 2669 the facia only has numbers 1 to 6 how do I type this in? It is on a Ford 6000 CD RDS EON stereo system in my Fiesta


I know that you use numbers 1-4 I believe. Push button 1 2 times, button 2 6 times etc. I reember doing that for some model but can't remember what :-(. Anyway, try that. If no luck, give me make and model and I will do some resarch for you.

Laterz,

http://mobile.jensen.com/jensen/docs/man/VM9512_DOC_OM.PDF

Jan 23, 2009 | Car Speakers & Subwoofers

1 Answer

When my battery died my Jensen DVD player "asked" for it's security code. My son tried random numbers until the system locked him out and now it won't accept additional attempts to unlock it. I...


Hi. On most models, you have to leave it disconnected from the power for around 24 hrs, then when you re-connect, you will get a few more attempts. This is to stop people trying codes continuously until they crack it.

Oct 06, 2008 | Jensen Car Speakers & Subwoofers

1 Answer

Parking brake wire override


DVD head units have one extra wire in their wiring harnesses, compared to a standard CD head unit. On my Jensen, it's a peach-colored wire, and is the activation wire for the DVD feature. During the installation, the instructions call for this wire to be tapped into the emergency brake indicator light wire. The reason is this:

The e-brake indicator light is what is called a "ground complete" circuit. That means that the bulb always has power applied, but when you pull the brake, that puts a ground to the wire and completes the circuit, allowing it to illuminate. The head unit sees this ground, and activates the DVD player.

In my Jensen unit, I simply ran this wire to a ground (I used a screw near the fuse box), and I put a switch on the wire, so I could break the ground contact at will. Jensen calls for a procedure to activate DVD playback. In their instructions, they tell you to select DVD from the option menu, and when the "lawyer screen" comes up (the one warning you to park before you watch a movie), you release the e-brake for 3-5 seconds, and then reapply it. To simulate that with the switch I used, I leave the switch closed (activated), and select DVD. Then I flip the switch "off" for 3-5 seconds, and flip it back "on". This tricks the head unit into thinking I put the e-brake off for a few seconds and then put it back on, and the movie will start. Then I can drive away.

Basically, ground the wire that is used for DVD activation, and put a switch inline on it. Then you can break and reapply the ground in whatever manner is required by the manufacturer of your head unit. If there is no off/on sequence with yours, as there is with mine, simply ground the wire to a screw inside the dashboard and you're done.

Aug 10, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...