How to connect it to the surroundsystem and the 4 speckers .

The SW8 and SW150 have line level and speaker level inputs. It has a line level output, which will not drive speakers without using a separate amp for the signals.

if this is while the raido is on the specker is blowen you can get a replacement specker at Raido Shack or Wall-Mart cheapest two placeses

If u can't find them just run new ones.

You can check elsewhere but this is one place that has a lot of them.
http://www.crutchfield.com/shopsearch/outdoor_speakers.html

check the plug connectors are the right ones for the radio maybe you need to fit more earths to the connectors

My specker was working fine then the am went to on protection mode and backs power mode but my specker doesnt work but on when my volume is low

try checking your connections and looking at the recomended connection scheme it should be fine

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

You haven't reinstalled the drivers for your sound device. If it's a Dell, you'll either need the Blue/Gray CD that came with the computer labeled "Device Drivers", or go to support.dell.com enter your service tag #, and select "Drivers", and download drivers for sound.

gurutim

yes you can splice ito the current speckers that you have

the audio amplifier inside the tv "blew up" after 8 years this is nothing unusual. my gut feeling is to hook up your surround sound for your audio. paying to fix this would cost $$$$