Question about Printers & Copiers

Open Question

Where can I find a seller for Canon NP 7161. Bassam Badawi Phone: 519 977 9566

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: key boadrd problem in canon np 7161

If You trust me ... then do it i had the same problem after too much hard work i found the LEDs was causing the problems just trust me and replace all the LEDs on the panel card ....
and remember me in ur prayers thanks and regards
contact me for further
jak1980_pk@yahoo.com
country Pakistan
Muhammad Ali

Posted on Mar 27, 2009

  • 16 Answers

SOURCE: a canon np 7161 with an e002 error code. It is my

ok let me help u on fixing your problem.
mostly this error is in fusing unit and may be due to power disturbance.
first press * (star) then 2 & 8 together again *(star) if succesfully u presed 2&8 together and then *(star) the number 1 (one) will appear in the box [ 1 ] then press 4 then A (automatic exposure) then 412 and finally finnish by pressing the start button/print button the machine will go OFF turn it ON it is now ok. if not start again follow the sequency untill to the step of pressing the start button insted of it press A.

try your best, kibokoyao waiting for your vote.

Posted on May 14, 2009

goodgold
  • 389 Answers

SOURCE: automatic exposure adjustment

NP7161: we include - blazes "id"; what throw?

Necessary entering the identification number of the access; the unset: Head - ID - a foots - a head - (on дисплее will appear ID1) - 2 - a start - (on дисплее 2-1) - 0 - (on displey 2-0) - a start - (the codes of the users delete) - ID possible to copy.

NP7161 - a regulation AE

Adjustment AE: -User mode 12 - an the man picture, 12. then - a button "+/- exposure" (24 steps); "Start" - a taking the change

Posted on Sep 13, 2009

vende
  • 1 Answer

SOURCE: canon np 7161 simulation

hi help me with this formula to reset canon 7161 e0003 is *2&8 at a go, then * then A then 412 is this the correct way. ?????

Posted on Sep 15, 2009

SOURCE: RIGHT DOOR OPEN SYMBOL IS FLUSHING WITH CONTROL CARD SYMBOL IN CANON NP 7161

Verify the state of fuses in power supply

Posted on Oct 18, 2009

canontech
  • 1219 Answers

SOURCE: canon NP 7161, auto exposure adjustment

WHAT KIND OF DETAILS?

You can calibrate the lamp under service mode * 28 (together for 3 sec) * i think under No.5.

Whe you open the front door, under instruction hoewto replace toner there must be an table with numbers and standard adj, values.By this table you can figure out which values do You need to change - something by my memory HL5 or similar value for lighter copy decrease value and oposite.

Posted on Jan 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon np 7161 photo copy machine error code 010


  1. If Cause of connector
All are The connector if not connected then Reconnect it.
2. Cause of Power Supply PCB.
Turn on the power switch. Set the meter
range to 30 VDC, and connect the probes to
J209-4 (+) and J209-3 (-) on the DC
controller PCB. Is the voltage about 24 V?
Suggestion:
See
"DC power is absent.Power Supply PCB is faulty
3. Cause Of Main Motor(M1) or DC controller
Replace the main motor. Is the problem
corrected? If no..Then
Replace The DC controller

Jun 30, 2016 | Canon Printers & Copiers

1 Answer

Canon 7161 error 805


• The exhaust fan (FM2, FM4) is faulty.or
• The DC controller PCB is faulty.

See Chapter 10 page 101 of the service manual You can download the service manual for the Canon NP 7161 from here See chapter 10 page 101
http://monitor.espec.ws/files/np7161_sm_123.pdf

Dec 29, 2013 | Printers & Copiers

1 Answer

E102 np 7161


If this is a canon copier then the E102 code means that the scanner lamp is bad or the laser unit is bad... Scanner lamp is a simple repair job for a tech. Laser Unit is a lot of labor. This can get expensive fast.

Canon Parts And Supplies

Sep 13, 2012 | Compatible Printers & Copiers

2 Answers

Canon np 7161 E004 error


Ok let me help u on fixing your problem.
mostly this error is in fusing unit and may be due to power disturbance.
first press * (star) then 2 & 8 together again *(star) if succesfully u presed 2&8 together and then *(star) the number 1 (one) will appear in the box [ 1 ] then press 4 then A (automatic exposure) then 412 and finally finnish by pressing the start button/print button the machine will go OFF turn it ON it is now ok. if not start again follow the sequency untill to the step of pressing the start button insted of it press A.

try your best, kibokoyao waiting for your vote.

Apr 26, 2012 | Printers & Copiers

1 Answer

On Canon NP 7161: what's the 123 symbol flash mean? And the clear powder also flash but it new one empty. Please help


The "123" symbol is that you need to insert the key counter or you need to deposit a coin. It is a control funcation for using the copier.

Sep 09, 2010 | Printers & Copiers

1 Answer

A canon np 7161 with an e002 error code. It is my


ok let me help u on fixing your problem.
mostly this error is in fusing unit and may be due to power disturbance.
first press * (star) then 2 & 8 together again *(star) if succesfully u presed 2&8 together and then *(star) the number 1 (one) will appear in the box [ 1 ] then press 4 then A (automatic exposure) then 412 and finally finnish by pressing the start button/print button the machine will go OFF turn it ON it is now ok. if not start again follow the sequency untill to the step of pressing the start button insted of it press A.

try your best, kibokoyao waiting for your vote.

Apr 04, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Canon np 7161 simulation


hi help me with this formula to reset canon 7161 e0003 is *2&8 at a go, then * then A then 412 is this the correct way. ?????

Jan 08, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Key boadrd problem in canon np 7161


If You trust me ... then do it i had the same problem after too much hard work i found the LEDs was causing the problems just trust me and replace all the LEDs on the panel card ....
and remember me in ur prayers thanks and regards
contact me for further
jak1980_pk@yahoo.com
country Pakistan
Muhammad Ali

Sep 15, 2008 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

old marine
old marine

Level 3 Expert

1453 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...