- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you can go online and get the code. for some reason you have to go to westinghouse website and put in your model serial number abd it will give you a code allowing your tv to pick up local tv channels i dont know the reasong behind this
Hi, How long does it take (in seconds) before it changes teh channel? Because some TV's, if you have more than 10 channels, have to wait before they change because you might want to change to a higher channel Example: suppose your TV has 99 channels but your remote has only buttons from 0 to 9. So if you want to switch to channel 7 the TV waits a little before it actually switch to 7 because there might come another nuber after the 7 as the TV doesnot know what channel you wants. 2 to 3 seconds should be the maximum delay. If it takes more time, check if this can be changed in the menu, often there is a delay possibility in the setup menu. If teh delay is over 4 seconds and you still have warranty on it, just return it to the vendor.
Some channels broadcast on diffrent sound channels and power. I would bet the ones that have static sound are the high frequency channels that broadcast in dolby surround 6.1 or are sending High Def signals.Before tearing it down I would check to see if the cable box or satellite reciever is out of date. If they are the company you go through should replace it for you. This should fix the problem. If not then you have a problem with your sound sending hardware.