Looking for assembly instructins for Evenflo baby gate model 1196 and extension panels model 1106.

Hi

We would recommend you contact Evenflo directly for assistance with your enquiry

Evenflo Baby Car Seats Infant Carriers Baby Gates and Toddler Travel...

There is a small slider under the handle that you slide back with your fore finger while lifting the handle.

from evenflo.com
Evenflo Child Safety Gates

• New one-hand Lever-Loc™ mechanism -- simply squeeze the buttons and push down to open
• Smart design cuts installation time by 75% -- pre-assembled for 5 step installation
• This child safety gate swings in one or both directions for easy walk-through
• Red/green indicator shows whether gate is properly locked
• Adjusts from 29" to 42" wide, 30" tall

Here you go. Just enter the model number in the search box and you'll be good to go!

https://plweb.evenflo.com/replacement_parts.aspx

For quick reference, just open the link below to see if your gate is listed, click on it and it will tell you the model #

http://www.evenflo.com/category.aspx?id=45

Please click the following link:

https://plweb.evenflo.com/replacement_parts.aspx

This site allows you to view or reorder manuals and even replacement parts for some of Evenflo's products.

They will ask for the Serial number and date of manufacture to be entered.

Both are available on the warning label at the bottom of the gate.

You can actually call evenflo directly www.evenflo.com

1 (800) 233-5921

Evenflo Company, Inc.
1801 Commerce Drive
Piqua, OH 45356

Also looking for a manual, but the model is actually #545 (per Even Flo's website, it is printed on the bottom of the warning label).

You could call customer service and they could send out new parts or give you a number to call for parts.

This might be somewhere for you to start...

https://plweb.evenflo.com/replacement_parts.aspx

There is also a phone # and you need the model # and date of manufacture to get the instruction manual. I'll keep looking tho!

Here is a link to Evenflo's website.
http://safety.evenflo.com/cs/sc/cssc_RD.phtml/
You can register your product, order instruction manuals and replacement parts. They also offer instructional videos, checklists and suggestions for keeping your baby safe. The site asks for the Model #10502, also the manufacture date (show example of where to locate.) I believe the instructions are free.
I order replacements parts in advance for items I can not live without. Living all over the world makes it difficult to get assistance in a timely manner. Also for gates that have permanently mounted hardware, I buy extra sets of mounting hardware. This allows me to move the gate, saving money by not having to purchase multiple gates.
This is not one of those times to "wing-it." Safety gates need to be installed per manufacturer specifications.
I hope this helps, good luck.

Kym McC