If i type the letters,poiujklm,numbers will com out,not the charachters that i want,howcan i repair it

Borrow a keyboard from a friend. If it still does it then there is something strange with your computer. If it does not do it then your keyboard may be corrupt so buy a new one

need to know the make and model of the t/w. could be the typeslug has broken or come unsoldered if it is a typebar machine. Look at the charachters on the key that are bad to see if they are damaged or loose or out of alignment.

If it is only one letter, it could be broken in half. Pull the printwheel out and look at it. If it is all charachters, push down firmly on the platen on the side where the print is worse. It should click back down into place. Sometimes the platen unlatches.

You may have hit a certain combination of keys on your Gateway laptop and turned on the NumLock function accidentally. The result is that the rectangle of keys from the 7 key down to the question mark key have become a number-entry keypad. Worse, Gateway manuals don't discuss this function.

Hold down the "Fn" key on the bottom row of the keyboard, and press the "NumLk" key. Type the letters UIO. If they come out as numbers, move on to the next step. Hold down the "Fn" key and press the "F11" key. Type the letters UIO. If they come out as numbers, move on to the next step. Hold down the "Fn" key and press the F11 key and "Scroll Lk" key simultaneously. Type the letters UIO. If they come out as numbers, move on to the next step. Hold down the "Fn" key and press the "F9" key. Type the letters UIO. If they come out as numbers, move on to the next step. Hold down the "Fn" key and press the "Scroll Lk" key. Type the letters UIO. They should come up as letters. If none of these help, then it's probably a keyboard malfunction and you'll need to get it repaired.

There are a couple of other alterntives that will work for you. Check my hint,. http://www1.fixya.com/support/r5831060-want_microsoft_office_capability_free
Jim

Here is the page for your computer if it is not windows 7 adjust the operating system in the choices

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=4041474

Sounds like you may just have your numlock on. Just press function key plus F6 (on a macboook) and the numlock is off. If not you may have a broken keyboard. You can try to replace the keyboard yourself using an Apple Tablet Repair Guide or send it to a third party service Apple Tablet Repair.

This error is caused by a corruption to your windows bootsector. I guess you are using XP. You will need to boot from your installation cd and choose the option to repair the computer using the recovery console.
once the console has found your operating system you need enter:-
FIXMBR
followed by :-
FIXBOOT C:
any problems post a comment.

code 12345

This problem may occur if the basic input/output system (BIOS) on your computer is outdated, or if one or more of the following Windows boot files are missing or damaged: Ntldr
Ntdetect.com
Boot.ini Use the Recovery Console loadTOCNode(3, 'summary'); 1. Use the Windows xp disks to restart the computer 2. At the Welcome to Setup screen, press R to repair the Windows xp installation. 3. Press R to repair the Windows XP installation by using the Recovery Console. 4. Type the number that corresponds to the Windows installation that you want to repair, and then press ENTER. 5. Type the Administrator password, and then press ENTER. 6. Type map, and then press ENTER. Note the drive letter that is assigned to the CD-ROM drive that contains the Windows XP CD-ROM. 7. Type the following commands, pressing ENTER after you type each one, where drive is the drive letter that you typed in step 4 of "Method 2: Use the Recovery Console," copy drive:\i386\ntldr c:\

copy drive:\i386\ntdetect.com c:\If you are prompted to overwrite the file, type y, and then press ENTER.