Question about Pioneer Car Speakers & Subwoofers

1 Answer

My deh-p600ub deck keeps turning off then turning on, then shuts off again whenever i try to push a button.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have a loose connection somewhere....

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pioneer deh 1300. I have all the wiring connected but there are no settings for the amp to turn on. I have gone thru and double checked the wiring and all the fuses on my amp also. Any ideas on...


make sure the amp has a good earth connection. is the light on the amp working and what colour is it? push in and hold the volume button their should be some settings there for it, also check that the deh 1300 is amp compatible

Jul 21, 2011 | Car Speakers & Subwoofers

1 Answer

Bought a car with the pioneer deh-p4300 in it and don't know how to set the clock,did not receive the paper work


I've had two Pioneer CD players and they both were set the same way. Turn it off then press and hold the AUDIO button if it has one. Then keep pressing it until it gets to the clock. I think on mine the hour starts flashing. When your done just turn it back on. == Answer == I had this problem too. In the far right corner is the "A" (Audio) button. Turn the stereo off and hold the "A" button until the clock comes on. The hour will be blinking. Use the up and down "Select" keys to set that. Then use the right "Select" key to switch to the minutes. Use the up and down keys to set the minutes. Push the "A" button when you're done.

May 17, 2011 | Car Speakers & Subwoofers

1 Answer

How to set the Clock on a Pioneer DEH- P2300MP


From Pioneer suport site... for most older Pioneer single CD players, you can set the clock using the following steps:
  1. Press and hold the SOURCE button until the unit shuts off.
  2. Press and hold SOURCE again until the clock appears.
    *With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button.
  3. Press the left or right arrow to select the segment of time you wish to adjust.
  4. Press the up or down arrows to increase or decrease the numbers in the blinking segment.
  5. Once the clock is set correctly, press the SOURCE button to exit.

Also, check in this link the User Guide: DEH P2300

If you continue to have problems, contact our Product Support at 1-800-421-1404.

Hope helps.

Mar 28, 2011 | Car Speakers & Subwoofers

1 Answer

How to set the clock on pioneer deh-p59001b radio


On my pioneer I have to have the key on with the receiver turned off. Push and hold the function button for about 3-5 seconds and the clock display should come on with the hours flashing. push the up-down buttons to set hours. Push the right button and the minutes flash, set the minutes with the up-down buttons and then push the source button (or power) to turn on your receiver and your done. Remember you have to have the key on and receiver off to set the time. I think I had to consult my manual 3 times. Pioneer seems to be the only one that won't let you set the clock with the power on.



Mar 30, 2010 | Car Speakers & Subwoofers

1 Answer

Deh-p7100r, works for about 10-20mins then shuts off, leave it a while, try again, same.


speakers r resistors on a radio sounds like one of your speakers r bad, turn the radio a little bit over 3/4 up connect the speakers one at a time until the radio shuts off this will tell u the speaker thats bad

Aug 30, 2008 | Pioneer Car Speakers & Subwoofers

1 Answer

I HAVE A PIONEER CAR CD RECEIVER DEH-P400 SERIES AND I NEED TO KNOW HOW TO SET THE CLOCK.


  1. Press and hold the SOURCE button until the unit shuts off.
  2. Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button.
  3. Press the left or right arrow to select the segment of time you wish to adjust.
  4. Press the up or down arrows to increase or decrease the numbers in the blinking segment.
  5. Once the clock is set correctly, press the SOURCE button to exit.
Back to Listing

Jul 07, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Speakers & Subwoofers Experts

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Pioneer Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...