Question about Pioneer Projection Televisions

1 Answer

Plasma model pdp-433pu loud pop thin no picture now 4 or 5 red blinking lightthin stop for about 15 sec

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like it could be a power supply.
let me know if you want to sell it.
naturboy-at-ufl-dot-edu

Posted on Oct 04, 2008

  • Mitch123180 Feb 12, 2012

    I have one I will sell you

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

II get sound for about 15 sec. but no picture and then shuts off


kp57ws50_57_in_rear_projection_hd_228277.jpg Problem with Sony KP-57WS520 57 in. Rear Projection

This model is really prone to one problem in particular--screen even briefly comes up bright red, green or blue and set shuts down.

15 seconds from turn on front power light should blink as set checks several things internally---if something wrong it does not let picture show.

Usually after shut down or failure power light will blink a sequence of blinks but not always depending on problem.

Did you see the screen at all go red, green, or blue before?

the more you tell me the better I can help

Mar 28, 2012 | Sony KP-57WS520 57" Rear Projection...

1 Answer

Picture went out and red light on the stand by button blinks ten times and stops for sec and starts the ten blinks all over. When I turn TV on I can hear sound of the tv trying to turn on but no sound or...


Hi,

10 blinks on KDP-57WS655 model no. is an error code for "High voltage protection". I can tell you exactly which part gone bad and assist you to fix it yourself. Click it here.

Jdvillanueva

Sep 29, 2011 | Sony Grand WEGA KDP-57WS655 57" Rear...

1 Answer

Repetative clicking sound when tv is plugged in with no picture or sound like its unable 2 switch on


TV is very common for having a power failure issue. The problem resides in the Y-Sustain board in most cases. The HDTV Television also have the same issue as they all use the same PDP Panel (plasma panel).

Loud popping and loss of power is common on plasma TVs and is usually either the Y sustain or Z sustain boards or buffers; in these instances the damaged part will be quite evident.

If this is an LCD you might have degraded insulation on one of the pink/blue back light power leads causing high voltage to 'arc' to the chassis.

The loud bang and smell is actually to your advantage as in these circumstances the damaged part is usually evident. It'll just be a matter of popping the back off and sleuthing around

That's the sound of your power supply going bad. You will have to have it repaired by a professional television technician.


Before making any purchases, please check the part and make sure it is what your TV needs. I am simply making recommendations and trying to point you to the right direction.

Good luck.

Jul 17, 2011 | Samsung HL-P5063W 50" Rear Projection HDTV

2 Answers

Loud pop sound now no picture or sound error message and flashing red light


Very likely the bulb has gone they have had some issues with bulbs going quite frequently on this model, bulb I believe is about £100 and an easy job on this model

Nov 27, 2009 | Toshiba 57HM167 57" HDTV

1 Answer

Tv doesn't want to start


The power light blinks about 9 times and the tv wont turn on what does this mean? its a magnavox 51mp392h/17

Aug 05, 2009 | Sony Projection Televisions

1 Answer

Sony 60" wega kdsr50xbr1 blinks red 4 times


Please check Fans are running in your DLP Sony TV as 4 times blinks shows that any one of four fans is stopped or not running.

Feb 10, 2009 | Sony KDS-R50XBR1 50" HDTV

1 Answer

I have a Pioneer PDP 60 inch plasma tv and I just recently noticed a thin line just right of center that starts at the bottom of the screen and goes straight up about 12-15 inches long. When certain colors...


This is Most likely a small crack in the screen the color is actually from the plasma it cant be fixed by yourself but i would reccomend checking the warranty or try taking it back

Nov 24, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...