Question about Panasonic PT-51HX41 51" Rear Projection Television

2 Answers

Panasonic PT-51HX41 TV shut off problem

We broke down and bought the digital converter for our TV, which worked fine when I first hooked it up. The picture was OUTSTANDING on most of the stations. I then redid how I hooked it up to go through the VCR and it worked just great. But I turned off the TV & converter box and went to eat, when I came back I turned on the TV & it would shut off in less than two seconds. I disconnected the converter box, and DVD player, but it still won't stay on. I don't know where to go from here. I tried a hard reset, but it still turns off as soon as it turns on.

Posted by on

  • 2 more comments 
  • Anonymous Sep 06, 2008

    Same deal, only my convergence went out of alignment when I went to that menu and started to fix that my TV turned off by itself. Now every time I try to turn it on the red power button flashes a little and then nothing. I can't get power to it to turn on(only red flashing light)

  • okader Sep 27, 2008

    i have the same problem too.

  • justmetim Sep 28, 2008

    The same thing happened to our television today.  We turn it on and the red power light comes on for a couple of seconds and then shuts off and.... nothing.......     Did you ever figure out what the problem was?  Is it fixable?

  • Anonymous Nov 09, 2008

    I have the same problem too.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the TV checked out and it was the convergence.  Will be around $275.00 to fix. 

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

The tv is in prot mode the mirco is seeing something that is wroung and it will not let the power supply come up. now i can be alot of things in the circuit but without checking the systems there is no way of telling what is the problem just rember big screens will cost u to repair one is 200.00 - 600 dollars.if u are lucky u could just have bad connections on the vert output transistor-or your convergance ic shorted out . i hope this will help some what marty

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Blue convergence + wont move right or lift, the Blue will move up and down.


try the hard reset method , that is, unplug all the cables and wait for half an hour , and replug all cables and try ......hope this will help you

Jun 20, 2008 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

The cable hook up on the TV broke off.


Yes...You may have to buy a new RF connector and replace. This will take some very good patience or purchase a new complete tuner. If you are not in a hurry for the tech shop. Use the rca jacks on the tv to a cable or satellite box. Just be sure when you power off you tv, that the tv is really off. A blank raster will look as if it is shut down for the time being! Good Luck!

Nov 29, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

I turn on the tv it beeps about 10 times no picture then shuts down


the beeping would be due to a failed power supply unit inside or a fuse there-of i would check this out before making costly repairs that will not work in the long run, hook me up with a good rating and have a good day!

Aug 15, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Panasonic PT-51HX41 51 inch


the blinking power indicator is actually a error code. How many times does it blink as I can assist you if you let me know how many times the led blinks

May 28, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Panasonic PT-51HX41 51 inch


If the power led blinks its an error code such as 3 blinks means convergence failure which is the most common error for your model.Let me know the error code and I will assist you with what you need to do.

May 28, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Panasonic PT-51HX41 51 inch


Can you post how many blinks the power indicator is blinking as that is an error code such as 3 blinks means Convergence circuits.

Mar 02, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Panasonic tv parts


those are both .27 ohm 1watt resistors

Jan 23, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Converter box trouble


hello no the only thing the box does is it takes digital signal and convert it in analog signal and cannot do any hurt your tv at all u will be just find marty

Oct 14, 2008 | Panasonic PT-51HX41 51" Rear Projection...

Not finding what you are looking for?
Panasonic PT-51HX41 51" Rear Projection Television Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...