Question about Janome Memory Craft 9000 Computerized Sewing Machine

2 Answers

Janome 9000 a friend gave me her old, dead janome 9000--it took a power hit and the repairman told her it was around$1500 for the motherboard...does this sound right? where can I get the motherboard?? THANKS joanne

Posted by on

  • jlafranc Aug 28, 2008

    Thank you for the fuse information; we will find a reliable Janome repair person.



  • sablepaws Jan 16, 2009

    I took my Janome 9000 to a dealer & he said it needs a motherboard will replace it for $700. Is this amount correct and is it worth it?

    Another concern is that a friend who owns an 11000 told me that these motherboards are no longer available. Is this true?

    On the fuse information, Can I find the fuse myself and check it?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you Thank you .....i had taken this machine to a Janome dealer..he said it needed a new computer...i was scepticle wrote in here and guess what..it was a $2.00 fuse!!! see some ppl are just not HONEST!!! Thanks so much!!!

Posted on Oct 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

The first thing to be checked is the fuse in the bottom of the machine. Have a different dealer do this check. If the screen lights up it is not a burned out fuse. Find an Authorized Janome dealer that you trust and let him check this machine.He is the only one who can get circuit boards from Janome. The machine does have built in diagnostics for some problems.
sewman7

Posted on Aug 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My machine won't feed. Repairman told me it needs a new feed motor but Janome doesn't make them any more. Can anyone help me find one?


www.partstore.com should carry old parts. Bay would be another choice for old stuff that is not made anymore.

Aug 07, 2015 | Janome Memory Craft 9000 Computerized...

1 Answer

I was embroidering on my janome 9000 it jammed and went dead and won't come back on!


Be sure that it's still plugged in and not on a plug in that is controlled by a switch that got accidentally turned off.

Other than that it is likely that a fuse got blown or the power supply died. In that case take it in for repair.

Dec 12, 2012 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome 9000 motherboard fault?


I would suggest to get another option, those motherboards are
expensive

Sep 26, 2012 | Janome Memory Craft 9000 Computerized...

2 Answers

I have a memory craft 9000 and it has just started sewing by itself..........HELP what can I do??


When it starts sewing by itself, unplug the foot control. If it stops sewing, then the problem is in the foot control.

May 03, 2011 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome 9000 seems to be jammed.


I just want to know the price of janome 9000

Dec 27, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Stepping motor error on janome mc 8000


From what I've read here, it could be one of two things: a blown motherboard or a scratched bobbin case.


Before you do anything else, I'd remove the bobbin case, clean it and the area around it thoroughly (and check it for scratches or dings -- perhaps a needle broke recently?) and then replace it and see if that fixes the error.

If not, unfortunately, I'll bet it's time for a check-up with a repairman. :(

Best of luck to you!!

Apr 12, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome 9000


I have a Janome 9000, was sewing and broke needle, replaced and broke another. I didn't have machine threaded, took out bobbin and would sew a little and stop saying thread broke. I took off top plate and started machine again, sew a little and stop saying thread broke. So I took out bobbin case and sewed again and stopped repeating the message. Everything looks OK, bobbin case and top plate. I guess I want to know if the timing could be off or do you think it is the computer part of the machine...Should I take it to the Sewing Machine Shop??

Apr 30, 2008 | Janome Memory Craft 9000 Computerized...

1 Answer

Memory Card 17


I believe only some of the '8000' cards can be used on the '9000' and this may not be one of them or it could be faulty.If you brought it from a retailer I suggest you return it explaining your problem, they may exchange or refund your money.These are 'old' cards now I believe apx 11-12 years.Hope you find a solution.good luck

Jan 26, 2008 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...