Question about Baby Gear

2 Answers

Safe Seat stuck to base

The anchors on our car seat latched improperly to the base and now we can't secure it our remove it! It is a Graco Safeseat.

Posted by on

  • dgoracy Jan 26, 2009

    yes, base is stuck to car seat. How do I remove it?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

Ok. You should be able to put your weight on the base to create some slack in the strap. Then push the release buckle and alternate your weight to pull the strap and loosen. Then you'll have enough room to manipulate the improperly installed latch.

Posted on Oct 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I follow this instructions and I am able to pull the carseat from the base within 15 seconds. Before reading this, I was thinking about destroy the latch and got the carseat out of the base and used it baseless. Thanks a lot for your post.

Anyway, Google rules!!!

Posted on Nov 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the straps to the buckle of the graco safeseat


Check the user manual for the Graco Safeseat car seat for instructions: http://babycare.manualsonline.com/manuals/mfg/graco/safeseat.html?idRes=617657

If you are in face looking for replacement parts, you can find them here: http://www.gracobaby.com/ReplacementParts/Pages/ReplacementParts.aspx

Sep 28, 2012 | Graco SafeSeat Infant Car Seat - Soho

1 Answer

I washed my daughters graco car seat and now i havent a clue of how to put it back together and i need re assemble it fast please help


Proper installation of a car seat is imperative to protectan infant. Accidents do happen and assuring that the instructions forinstallation of the Graco Infant Restraint/Carrier are followed will increasethe chances of preventing injury or death as a result of an accident. Graco carseats are a popular choice among parents due the availability of products atcommon retail stores, affordability and user-friendly baby gear.Graco Car SeatInstallation
Step 1
Plan to secure the infant seat facing the rear inthe middle of the back seat. If a center position is not available, positionthe seat directly behind the driver's side seat. For safety reasons, therestraint should not be placed in a position where there is an air bag. Ensurethat the proper vehicle lap belt system is in place; manually adjusted lapbelts, automatic locking retractor lap belts and lap/shoulder belts withlocking latch plates are all considered safe for use with the Graco InfantCarrier/Restraint.Step 2
Remove the carrier from the Graco car seat baseby squeezing the lever at the rear of the restraint and lifting the seat up.Place the base in the vehicle facing the rear. Thread the vehicle shoulder andlap belts through openings at the end of the base without twisting the belts.Secure the belts by placing plastic tongue over the belts. Tighten the vehiclebelts by pushing down on the base and pulling out any slack.Step 3Install locking clip to secure shoulder and lapbelt together just above the seat belt buckle. Connect the two belts with thelocking clip. Buckle the lap belt system and tighten by pulling out any slack.Ensure that car seat base is secure by pulling and pushing on it; the baseshould not move sideways, forward or backward.Step 4
Place the Graco carrier in the base. Push down onthe restraint until it clicks and locks into the base. Set the infant in therestraint for travel and place harness straps over the baby's shoulders. Clickthe chest place together over the sternum and lock the buckles into placebetween the legs.Tipsand Warnings
  • Contact local police departments, hospitals and fire departments to inquire about child car seat safety checks
  • Graco Infant Restraint/Carrier will not protect against serious injury or death if not installed properly. Always read the Graco owner's manual that comes with product prior to attempting installation and travel with an infant.

Jul 19, 2011 | Home

1 Answer

I need the installation manual for Graco Infant car seat/carrier model no. 1760973, Pooh "Snug Ride"... anybody?


http://www.gracobaby.com/CustomerService/ProductInstructions/Pages/default.aspx?page=ProdInst

Jun 09, 2010 | Graco SafeSeat Infant Car Seat - Soho

2 Answers

My Graco SafeSeat smells like sulfur/matches.


hi,
this is because of the foam inside it got expired and its a cheap quality ..some time smells like onions...u better replace the foam it is not good for your childs health......i had the same problem......


thank you for using fixya,rate my answer
vijay

Oct 01, 2009 | Graco Infant SafeSeat (Step 1) 8A05RXY in...

1 Answer

Trouble removing snugride base from car


If the base was installed by someone who put their body weight on it to get it really tight, try to do the following:

If you are able, climb in the car and place your knee in the center of the seat base and put your weight onto it. Then, at the same time, try to pinch the clip end of the latch belt (the strap part that is attached to the car seat base) and push the clip away from you (toward the seat) to remove it from the metal latch loop/ring (the part of the latch system that's actually part of your car).

If this doesn't work, you can try to loosen the strap a little while leaning on the base, and then try to push the clip forward and out of the latch ring.

Aug 06, 2009 | Graco SnugRide - Giselle Infant Car Seat

1 Answer

Graco Car Seat (French Roast) lost manual


Try the product's website, try this website http://www.manualsonline.com/, and if those two aren't a help try different search engines.

Aug 04, 2009 | Graco SafeSeat Infant Car Seat - French...

1 Answer

My Graco Infant car seat STINKS and is brand new!


have you tried washing the actual seat (not cover) and base if not take the cover off and use bleach (on plastic parts not cover) and get in the groves/ Hallows on the seat & base

May 13, 2009 | Graco Infant SafeSeat (Step 1) 8A05RXY in...

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...