How to set time and date

Instruction Books HoMedics USA Select your model from the download list. Date/Time instructions on page 12, and now you have the complete owner's manual!

Press the MENU/OK button, press cursor-left, use cursor-up/down to select the wrench icon, press cursor-right, then select the "Date/Time" command.

If you need a manual, you may download a copy here. The setup menu instructions are on page 65, the date/time setting instructions are on page 13.

1) Sept 2011.
If you have a T1030D timer instruction manual, then that would be helpful for many people.
Scan manual into .jpg format (file format) and then post images on Flickr.
Add a comment with link to those images so expert can access the information.

2) Currently the only instruction manual is the following, where you can also send information saying what your instruction manual says:
http://waterheatertimer.org/pdf/Instructions-for-setting-Gardena-T1030D.pdf
http://waterheatertimer.org/How-to-program-Gardena-C1060.html#manuals

3) That being said:
Let me add some guessing, and then you can add a comment with what you observe.
Between us we might be able to work out a solution.

4) I don't think you can set specific dates on either T1030 or T1030D
It appears the T1030D is a weekly timer, just like T1030.
The word 'date' does not appear in T1030 manual except 'date of purchase.'
http://waterheatertimer.org/pdf/Gardena-1030-MANUAL.pdf

5) T1030D: each day of the 7-day week is broken into hour 1 through 24.
Each day can have between 1 to 3 settings. I think this is frequency.
You can set the watering run-time from 1 to 120 minutes for each set time.

Hi,
Please click here to download the instruction manual of the said camera.
Moreover, at page 72 of the instruction manual you can find how to set up date and time.
Thanks.

Hi
Thanks for using FixYa. To adjust the date and time you’ll need to follow these instructions---


To wind the Movement:


With the crown in position 1, flush against the case, turn the crown
clockwise, completing approximately 15 to 20 revolutions, then
gently but quickly move the watch back and forth several times to
start movement.


To set the Time:


Once the watch is running, pull the crown out to position 2 and turn
it in either direction to set hands to desired time, then push crown
back in to position 1.

For more information you can see this manual---

Tommy Watches Operating Instructions

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Set the date and time To set the date and time displayed on the BlackBerry smartphone, complete the following steps:

1. In the Clock application, press the Menu key.
2. Click Options.
3. Click Set Time.
4. Set the date and time.
5. Press the Menu key.
6. Click Save.

Retrieve the date and time from the wireless network To retrieve the current date and time from the wireless network, complete the following steps:

1. In the Clock application, press the Menu key.
2. Click Options.
3. Click Set Time.
4. Set the time zone in the Time Zone field.
5. Perform one of the following actions:
   • To retrieve the date and time from the wireless network that your BlackBerry smartphone is connected to, change the Date/Time Source field to Network.
   • To retrieve the date and time from the BlackBerry® Infrastructure, change the Date/Time Source field to BlackBerry.
6. Press the Menu key.
7. Click Update Time.
8. Press the Menu key.
9. Click Save.

Note: To set the time manually, change the Date/Time Source field to Off.

Here is a link to the manual.

http://www.timexaudio.com/pdf/T436_IB_(new)_v3b40949_96.pdf

From the manual here is how to set the time.

2. Press and hold the Time Set Button until the time display blinks.
3. Press the << or >> Button to adjust to the correct time. Press and hold the button for faster forward or backward
adjustment.
4. Remember to set the correct AM or PM. The PM Indicator is located on the upper right side of the display;
there is no AM indicator
5. Press the Time Set Button again. The year display will blink.
6. Press the << or >> Button to adjust to the correct year. Press and hold the button for faster forward or backward
adjustment.
7. Press the Time Set Button again. The date display will blink.
8. Press the << or >> Button to adjust to the correct date. Press and hold the button for faster forward or backward
adjustment
9. Press the Time Set Button again or wait for about 10 seconds to exit the time setting process. Two beeps
will confirm time setting mode is complete.

To set up date, time, conversion rate, and tax/discount
rate, place the switch at the "RATE SET" position.
Date:
• Enter in the order of month, day and year, then press date/time button
to complete the entry.
• Use ▪ to separate month, day, and year EXAMPLE 3▪13▪2009.
• When (date/time) button is pressed, the number entered is evaluated
and displayed as “date”
Time:
• Enter in the order of hour, minutes, then press date/time button to
complete the entry.
(There is no entry available for the seconds value. The
clock starts at zero second.)
• Use ▪ to separate hour and minute values EXAMPLE 8▪15
• When is date/time button is pressed, the number entered is evaluated
and displayed as “time

When settings are complete place the switch back to GT

This model is like any other analog watch, only difference is the screw-down crown...turn counter-clockwise until crown pops up...pull out 2 clicks and set time...push in 1 click to set the date, then into case completely...remember to screw down watch back into case...good luck :)

No battery back-up. There is a capacitor that stores a bit of charge. This allows you to replace the batteries and still keep the date/time setting. Leaving the camera without batteries for 10 minutes will completely drain the capacitors. This will cause the date/time to reset.