- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you need WIFI password, access the router user by typing http://www.routerlogin.net or 192.168.1.1 in
the address field of your browser and then press Enter. Enteradminfor the router user name
and your password (or the default,password).
logging in. In the main menu on the left, click onWireless Settings,from there you can check the wireless security Passphrase or Key code.
Log in to your router's configuration page using
your internet browser by typing "http://192.168.1.1" in the address
bar. Type in “admin” for both username and password
which is the default user name and password. Click on “Setup” at the top Scroll down to “Network Setup” If you have forgotten the router's user name
and password, and the default user name and password aren't working, try resetting
the router back to factory defaults:
With the router powered on, hold the reset button
(located on the back of the router) for 25 seconds. Then disconnect the power
from the router and wait 10 seconds before plugging it back in.
After the reset, you should be able to login to
the router with the default user name and password.
If you've forgotten the Router password, then press the Router Reset button (a small point) located next to the Ethernet port on the Router to restore the Router to factory settings. After resetting the Router to factory defaults, use the default name and password.
In order to check or change your password for NetGear , go to http://192.168.1.1.
It will ask you for a user name and password. The default is “admin”
and “password”, Once you are connected, go to Wireless Settings and you have the
option to change password there.
the online user manual is available from here http://support.digidave.co.uk/index.php?_a=downloads&_m=get&_i=5
Section 2 Page 37 - explains how to login to the router and the default values for username and password
User ID. The default factory setting is admin.
Password. The default factory setting is motorola.
If you have changed this and forgotten - then you will need to do a factory reset of the router see page 82 - button at the back marked reset - hold this in for at least 5secs
When the login window appears, set the user name to Admin and leave the password box empty. If this doesn't work, you may also try admin for both username and password (all small letters).
If the default doesn't work, you may reset the password by pressing the reset button for 30 seconds. This will bring the router to factory default settings (including all the configurations set on the router).
Forgotten your password Press the Reset button for about 10 seconds to reset the router to the defaults, then use the default user name and password (admin and admin) to access the Gateway Wireless Router Setup utility.
Usually the default password is found on the bottom of the router .You can find number below the SN bar code.
What you need to do here is to get the Wireless security from your Linksys router by accessing its setup page, Just type http://192.168.1.1 on the address bar of your working computer then that should be asking you for a username and password, just leave the user name blank and type admin for password. If you're already on the router setup page you will see there Wireless tab just go to it and after that go to Wireless security sub tab under wireless and you can find there the wireless key that you need..
If that wont work contact me back for further help....
Don't forget to rate the solution FIXYA thank you...............