Hello and good afternoon, I searches for the software and the driver of the CD TDK for DVD printer LPCW-50 for Windows XP. Can you help me? 'thank you very much!' Yours sincerely to Werner Holzer

The new updated version is now here:

http://support.casio.com/en/support/download.php?cid=005&pid=38

The printing application requires rosetta so is not supported in lion. As the actual printer is discontinued the two choices are: 1. Get a new printer or 2. Run snow leopard WITHIN Lion using software such as 'Virtual Box'. http://m.zdnet.com/blog/apple/run-virtualized-snow-leopard-and-rosetta-on-lion/10898

Use the casio software available for win 7 and 8 here:

http://support.casio.com/en/support/download.php?cid=005&pid=38

For models: CW-L300/CW-K85/CW-E60/CW-75/CW-50 and the TDK

Did you find a driver? i'm stuck!!

Hi,

You can get yourself a free set of drivers by going on the link mentioned below:

http://support.casio.com/download.php?rgn=1&cid=005&pid=337

Please let me know if the provided information has been helpful.
Please rate me if the information provided was able to help you.

this is a CASIO machine and you need the 3.50 driver here- now works a treat on Windows 7 - you need to install the new software and driver

http://support.casio.com/download.php?rgn=2&cid=005&pid=338

look on site tdk or google for drivers lcpw 50 drivers

Scott Jones - 123 Internet Designs Ltd

The TDK printer is in fact a Casio Printer who have updated their drivers ready for Vista.

You can download them from here: http://support.casio.com/download.php?rgn=5&cid=005&pid=337

Hope this helps!

[email protected]

123 Internet Designs Ltd
www.123internetdesigns.com

this is the 420N, not the 440N?  
is this an internal or external burner?

what operating system are you using?  on Windows XP, there's a good chance that you can just use the default drivers for that...

the best set of drivers i can find is here:

http://www.opendrivers.com/categorycompany/15/11603/cd-rom-tdk-free-driver-download.html

but most of those are firmware updates, or for slightly different models.

I had the same problem. In fact, the board connector inside the printer was not really fixed. I just pushed it and it works perfectly now. But you have to open it... It's easy to do