Question about Vtech 9009111 Cordless Phone

2 Answers

VTECH VT9121 When the phone earpiece is in the cradle, the "IN USE" button blinks incessantly, as do the three orange lights on the left, right, and bottom of the cradle. Even after hours and hours of being in the cradle, with the "POWER" and "CHARGING" lights lit up in red, the phone earpiece does not seem to charge. The Caller ID works, but you cannot hear a dial tone from the earpiece. Does the phone need new batteries? Or does it need to be thrown out?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Voice message light keeps blinking

Posted on Mar 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

On the handset the IN USE/LOW BATT LED are one and the same. If it is blinking during and after charging and you cannot dial out or hear a dial tone, replace the battery.

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lenovo blinking orange light only


1) try to turn on the computer and after the BIOS appear press key f8 and select safe mode.
2) click the icon my computer click the properties and select took, use check now with chkdsk, and fix folders too.
3)run the antivirus+malware+update windows,
4) You can get support from LENOVO via ONLINE get the sofwtare diagnostic, or use the installed in your equipment RUN it. for to see if there are conflict hardware vs software.
God bless you

Sep 27, 2012 | Computers & Internet

2 Answers

Alternate green and orange lights flashing, tried to remove battery pack and left off for half hour, still problem, if i hold green button down orange light blinks 15 times which i saw in the manual to...


Hi I have a ip100 portable printer and both green and orange lights flash. Green flashes twice and the orange light flash at what seems to be a random disorder.

May 17, 2011 | Canon iP100 Portable Printer

1 Answer

The handset lights up and the incoming number is shown but you dont hear it ringing


Many times there is a volume switch on the actual handset itself. Most commonly on the left side of vtech devices. there are three different volume levels. By pressing up on the button you should be able to turn the volume up until it has an audible tone confirming volume change. Handset should ring with incoming call when audible tone is heard by pressing up on volume button.

Oct 13, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

Paper feed not working. green button and orange


I assume you mean that the power and resume lights are blinking. This signals a carriage stall. Open the top cover, if the cartridge cradle moves to the right, it isn't stuck and may be a one-time issue. If it is stuck, unplug the power to the printer. Open the access door and observe the carriage position. Clean any lint or paper pieces out. Remove any obstructions. Move the cradle and continue checking for lint, paper and obstructions until the entire area is cleaned out. If the print carriage started out on the left side, return it to that position to make sure the cartridges are back in the capping station. Look inside the printer along the cartridge cradle path for obstructions and remove any. Remove the rear access door and check for paper pieces, remove any obstructions.

Plug in and turn on the printer and see if the carriage returns to the left and reseats itself in the capping station. Close up the printer.

If this doesn't work, the printer may need service.

I hope this helps.

Cindy Wells

Mar 28, 2010 | HP DeskJet 5740 InkJet Photo Printer

1 Answer

My headset has a constant buzzing in earpiece. Even when no line is selected. Can't hear dial tone.


On left hand side of base unit dial has to be set with the number 1 in the 3'oclock position. On the right hand side of base unit there is a switch set it to the 1 position. On the headset press and hold the vol - and vol + and pick up call buttons at the same time until an orange light on headset blinks a few times.

Problem solved

Jan 04, 2010 | Plantronics Radio Communications

3 Answers

Vtech cordless phone appears to be mute


Try the "hard reboot". /1/ Unplug power from base station. /2/ Disconnect battery in each handset. /3/ Wait a few minutes. /4/ Reconnect battery. /5/ Re-plug-in power to base station. /6/ Place handset in base station, and wait a few minutes for it to recover.
You may have to reset time/date and/or the handset ##.

Aug 24, 2008 | Vtech 9009111 Cordless Phone

1 Answer

Headset CS50


It sounds like you need to re-register the earpiece to the base. To do this, use the following steps:
1. Return the headset to the
Headset Docking Cradle

2. Press and hold both the
Speak Volume Adjust Buttons (+/-)
on the back of base unit for a
minimum of 5 seconds. The
Red Power Indicator will then
flash

3. Press and hold the Headset
Mute Switch (black button on top
of earpiece) for a minimum
of 5 seconds. The On-line
indicator (green light on boom)
will then illuminate.

4. Subscription completion is
indicated when the Power
Indicator is fully illuminated
and the On-line Indicator is
extinguished.

5. If subscription fails within 2
minutes the headset will return
to the un-subscribed state.

Aug 19, 2008 | Plantronics CS50 Wireless Headset

1 Answer

Pairing s9 headphones w/krzr


OK I managed to get my head set to work. Make sure the unit is charged, press and hold both the 'ON' button (on neck piece) and the "PLAY/PAUSE' button on the right earpiece. Keep holding then the LED should flash Blue three times THEN flash alternate RED and BLUE. You should then be able to Pair the Device. Good luck

Oct 21, 2007 | Motorola Radio Communications

2 Answers

Samsung battery


Green:Fully charged
Amber:Improper connection
Red:Charging

Sep 04, 2007 | Samsung SCH-i730 Pocket PC

Not finding what you are looking for?
Vtech 9009111 Cordless Phone Logo

951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...