Question about RCA P52926 52" Rear Projection Television

1 Answer

NO POWER One night it worked fine, next day nothing. I opened up the back and seen a blown fuse to the left side. Put a new fuse in and it keeps blowing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Have the power supply checked it may have gone bad.

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 52" Quasar


Could be anythings wrong with it,must hire a tv Tech.to troubleshoot and repair.Because doesn't know the causes and the problems was in storage 5 years ago.Tries check all cales wires plugs in connections are tightly connected and no loose connections wires on those PCB boards,might help make the tv it work again.

Dec 07, 2010 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Mitsubishi WD-52525 was working fine and now it will not turn on


This is just a shot - but it worked with my Sony (same problem).
Pressed remote power on button AND held Power button on TV on at the same time.

Set clicked 4 or 5 times and then came on....

Other, most have a (VERY small) reset switch on the rear - near where the power cord enters the TV... Use a flashlight and a mirror to locate it on your set....

Nov 26, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

My Toshiba TheaterView has no sound or picture


You may have overloaded your audio output with the external speakers(impedance or short wire problem?)as a result the audio out i.c maybe damaged which in turn may have blown one of several fuses in the power supply.maybe regular GMA type fuse or picofuses,you can try replacing blown fuse but if they blow right back you`ll need the help of a repairman

Nov 02, 2009 | Projection Televisions

1 Answer

43FDX15B No picture, Power light stays on


Just a thought, but check all of the pico fuses for a blown fuse. The pico fuses look like a small yellow resistor. Some Hitachi's are famous for having a blown hi-volt ceramic capacitor and a blown pico fuse.
I think the red led on is a short protect indicator, but I could be mistaken.

Sep 08, 2009 | Hitachi 43FDX15B 43" Rear Projection...

1 Answer

Digihome digital terrestial receiver Model DVB 915 I sitched the TV set off at night and then turned off the electric switch at the wall socket for both the TV and Digi Box. Next day the digibog...


hello make sure power is off take the top off the digibox see if you've got a glass fuse inside if the fuse is black its blown .where the fuse is holders is it should say what the fuse is rated at ie 1.25 amp put a fuse in with the same amps if it blows again then you have a dead short in the circuit good luck

shaun

Jul 21, 2009 | Projection Televisions

1 Answer

I have a Panasonic CT-26WX15N TV that was working fine when turned off and now it won't turn back on. I have it plugged into a surge protector and all the other electronic devices work fine. I also...


first things first- check the main power fuse; remove the 9 silver screws from the back of the unit, slide off the rear cover, and look at the main board right next to the power cord connection. There's a small, 6.3 amp fuse. Take a look at it; if it's blown... replace it.

Jun 02, 2008 | Projection Televisions

1 Answer

RCA P60752EB Power problem


Apparently, blown fuses indicate problems elsewhere in the circuit. The block is a voltage dropping resistor, has nothing to do with problem. If you think it's worth it, take to pro/tech

Apr 07, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

50" samsung, worked night before, turned on in am and click noise, powers down- HELP!


It definately is a bad lamp it appears. Let me know the part # for that baby and i can get u one. Should be on Left side of set as seen from the back. Red sticker or green with #'s such as these. BP96-01073A or something similar to that. Let me know and if it looks blown up we are positive. I doubt it is the color wheel because set will sometimes still turn on if it is bad. But you will also witness a loud whining sound which resembles a dentist drill if that is going bad. Good luck and keep me posted and give me a good rating. That is what keeps me going. Thank you GURU JAY

Dec 28, 2007 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

Power button Flashes


Bad Convergence circuit , replace 2 STK392-110 & fuse will take care the problem

Jul 18, 2007 | Hitachi 43FDX15B 43" Rear Projection...

1 Answer

TV doesn,t turn on


the power regulater for your system have a short take it to a tech to have him fix it orelse you might cause further damage.

Feb 17, 2007 | RCA P46812BL 46" Rear Projection...

Not finding what you are looking for?
RCA P52926 52" Rear Projection Television Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...