Question about Ricoh Office Equipment & Supplies
Try the procedure below. Its a hardware error on the device
Press and hold online + escape, then power on.
Use up and down arrow keys to select SP2
Use up and down arror to locate SP5
Use up and down arrow keys to select 810
Confirm the selection
Power off and on.
The error code is now cleared.
Posted on Aug 18, 2008
SOURCE: Ricoh Afficio 250 code SC900
If changing the total counter the fault does not disappear, try pressing . (point) and # for more than 10 seconds. this reset and reload the software.
Posted on Sep 13, 2009
fuser over/under heat u need a service engineer to reset it
1 thermistors dirty
2 thermastat blown
2 lamps blown
try resetting it 1 st
press yellow key then 107 then hold red key for longer than 5 sec
go to section 5 (mode i think) then 810 sc reset press 1 then hash key off on
Posted on Nov 04, 2010
This code is related to a jam in Fusing Unit.
First of all you need to repare that jam problem. (Probably a stripper pawl out of the place) and after that you can disable that message by in SP mode. The main problem is the jams. After that reply to me and i help you disable the message
Posted on Apr 22, 2011
Tips for a great answer:
Aug 18, 2008 | Ricoh Aficio CL7000 Laser Printer
May 05, 2011 | Ricoh Aficio 1013F Copier
Apr 22, 2011 | Ricoh Aficio MP 1600L Black and White...
Nov 19, 2010 | Ricoh Aficio 1515MF All-In-One Laser...
May 19, 2010 | Ricoh Aficio 1018 Printer
Aug 22, 2008 | Ricoh Office Equipment & Supplies
158 people viewed this question
Usually answered in minutes!