Question about Kenmore 22422 Top Load Washer

1 Answer

KENMORE 90 My top loader Kenmore of 10 years suddenly would not agitate, spin or drain the water ( it would only fill the water). After filling the water, it starts to make a weird cliking sound as oppose to start agitating. Please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

There is a part between the motor and gearcase called a coupler, the clicking happens when it cracks. Easy way is to pull the machine foreward and tilt it back to expose the bottom. Clips hold a pump, has two hoses attached, then a motor, unclip wire harness on left and any other attached, mark these extra wires if it has them. The motor has two clips supported with two 1/4 in hex screws, Now you should see the coupler, a rubber donut and two three pronged plastic flanges attached at gearcase and motor. Use a 1/2 socket to flush the new coupler flanges on both sides and the rest is a experience.

Posted on Aug 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore elite 90 series 11028902790 fills w/ water & agitates. On drain cycle it won't drain unless you put drain hose to floor drain position. Drains water but will not start the spin cycle. Help


It is either a bad pump or a bad control. Call Sears. Hard for the homeowner to fix. If not in warranty, ask them how much to fix and then decide if the old one is worth the money. If the machine is 10 years old, go for a new one.

Jun 01, 2015 | Kenmore Washing Machines

1 Answer

My wahser just stopped working it filled with water and then started agitating and then all the sudden stopped please help


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    3 Answers

    My kenmore 800 washer is off cycle for example when i start a load of clothes it starts agitating before filling, and doesn't always spin all the water out of the clothes


    I have the exact same problem with my Kenmore 800 top loader, Model # 110.29822800. It is only 1.5 years old. Any suggestions?

    Jan 19, 2011 | Kenmore 22422 Top Load Washer

    1 Answer

    Kenmore 90 Series fills with water but would not agitate or spin


    You have a problem with the motor coupling. Top-load washers use what's called a direct-drive system, meaning it does not use a belt but what's called a "motor coupling". I probably replace 5 a week because these little guys break because of 2 reasons that i've found.
    1) The break mechanism is too dry and causing the basket to stop at a holt, which puts a lot of strain on the coupler.

    2) They break because of over-loading. I don't think you're over-loading though because it was find for 5 straight years.

    Good luck to you. The repair is kind of hard to do on your own for the first time, so I would call an authorized technician. It will run you anywhere between $90 to $120 at most.

    Best of luck!

    Jul 14, 2009 | Kenmore 22422 Top Load Washer

    1 Answer

    I have a series 80 top loader. It filled and


    Screws holding the lid switch was broken. Had to replace lid switch.

    Jun 11, 2009 | Kenmore 24902 Top Load Washer

    1 Answer

    Kenmore will not agitate


    The timer is the most common problem. Call any appliance parts store and tell them the model number and ask for price for new timer. Also call sears appliance parts and get price. But a new timer and install it.

    Apr 15, 2009 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    Washer won't drain or spin


    top loader ??? or front loader??? if top loader you have broken your lid switch, will fill, agitate, but when it comes to drain/spin for safety reasons if the unit doent recognize the lid closed it will not advance...if yo have a front loader then i would suspect that something has gotten into the pump assy and preventing drainiing of water therefore will not spin

    Mar 02, 2009 | Kenmore Washing Machines

    1 Answer

    No spinning or agitating


    If it has a mechanical timer switch, (the main control knob) that is possibly the culprit. The timer switch is basically the "brain" of this type of washer. I had this problem on a washer.

    Dec 26, 2008 | Kenmore 24032\24036 Top Load Washer

    Not finding what you are looking for?
    Kenmore 22422 Top Load Washer Logo

    Related Topics:

    54 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Jesus  Colon
    Jesus Colon

    Level 1 Expert

    12 Answers

    Fred Sops

    Level 2 Expert

    271 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...