Shuts itself off, sends out extra pages, all "when it wants to"
I have a unique technical working environment: I support computer equipment and peripherals for ships on the Great Lakes. Right now I have a Canon MF-4150 that is maybe a year old that is currently turning itself off and during any print job may or may not send out an extra piece of blank paper. It has been doing this for about a week now and I have not found any solution, beyond my own surmising of replace it.
Do you have any suggestions for me to try when I next get on this ship? I have to ask for instructions that include "try this, and if that didn't work, try this, or this, or this..." please.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Which page were you on before the system shut down? Start your computer and open up browser which you were using before the shutdown. Go to the history of the browser and search for the page on which you were working or you can also restore the previous session and get back your webpage. You can also avail our technical service by visiting our website http://www.vtechsquad.com.
This sounds like you equipment is overheating and is shuting down on protection mode. Is the Canon in an enclosed environment or sitting on something that is already warm? Try moving the Canon to another area. Good Luck. George
BLUE EYES TECHNOLOGY Blue Eyes technology aims at creating computational Machines with perceptual and sensory abilities like those of human beigns. Blue Eyes system is thus a versatile system which can be modified to cater to the workingenvironment. The Blue Eyes system has hardware with software loaded on it Blue Eyes systemcan be applied in every working environment requiring permanent operator''s attention for it. The hardware comprises of data acquisition unit and central system unit. The heart of Data acquisition unit is ATMEL 89C52 microcontroller Bluetooth technology is used for communication and coordination between the two units.Blue eye system can be applied in every working environment which requires pemanent operator''s attention. Blue eyes sytem provides technical means for monitoring and recording human operator''s physiological condition. A blue eyes is a project aiming to be a means of stress reliever driven by the advanced, technology of syudying the facial expressions for judgment of intensity of stress handled. In totality blue eyes aims at adding perceptual abilities which would end up in a healthy stress free environment and can be applied in every working environment requiring permanent operator''s attention. http://www.scribd.com/doc/13745433/Blue-eyes-Technology
hope this will help u.
please rate my solution.
have a nice day.
Sorry. The MHz of your radio cannot be changed. And there are no "private" frequencies available for use. However, your radio is equipped with this in mind.
There are 22 frequencies built into the T5500, along with 38 Interference Eliminator Codes. The two combined offer you over 836 choices to avoid other people. And if this is not sufficient, they also have the capability Qt filtering.
From the manual pg 27....... "The protection circuitry has functioned because the positive and negative speaker connection wires are "shorted," speaker systems with an impedance less than the indicated rated impedance of this unit are used or under severe use, such as loud volume, excessive power and in an excessively hot environment."
Once I had a problem with Ethernet auto negotiation, fax-es and AS5300. all links in fax IP path had to be set to fixed configuration (ex. 100 Mbps full-duplex).
Cisco equipment could not autonegotiate link speed by itself (VG248, C3550 and AS5350), so it tried every few seconds to re-negotiate ethernet link speed, and those extra packets broke fax transmision over IP. Voice worked OK, at the same time.
This could be a mis-match of paper sizes. Example, computer could be sending an A4 page to the printer. The paper size in the could be set to Letter. Ensure the 4 paper sizes match, in the computer - the document and printer driver; in the printer (change in control panel) and paper tray (adjust the physical side and length).
This isn't a problem. When your the computer boots it is sending out a signal on the USB cable to make sure everything is ok. It doesn't know if more devices were added or removed after you shut it down and it's just trying to get its bearings about its environment. When the printer sees this signal it will do a sanity check of itself as well. It will move the cartridge carrier and it probably has a mechanism that wipes the printer head to make sure it is clean.