Question about Canon i80 InkJet Printer

1 Answer

Canon pixma 1200

My printer won't print because of the waste ink absorber is full. what should i do? is there any solution to this problem?
please help me. thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Well with canon ip1200, its very easy to solve.And here it goes -- turn on the printer and place the paper to the feeder in order to print.now try to print a file by giving print command.now it will show that "waste ink absorber full" error.At this situation,disconnect the power cable attached at the back of the printer.Keep holding the power button for 5 to 10 seconds.without releasing,turn on the printer and when the power lid glows then on release the power button.turn the printer on again..now the error does not appears again.you can print your file easily.
                          but this is not a complete solution bcoz everyday in order to print, you have to bear the same procedure.

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon multipass pixma mp500 waste ink absorber full


printers are cheap buy a new one or look in a dumpster where university students live and have been throwing out junk cuz they are done with school.

Nov 23, 2013 | Canon MultiPASS MP730 All-In-One InkJet...

2 Answers

Canon pixma ip8500, on third print head in about 4 years. will not print yellow despite repeated head cleaning cycles, now waste ink absorber is full. need instructions for emptying/replacing said...


the waste ink absorber cannot be replaced mate. you have to buy new printer.the waste ink absorber is the sponge part where head cleans all its ink. its a common problem in cannon.

Oct 01, 2010 | Canon PIXMA iP8500 InkJet Photo Printer

1 Answer

Triangle and ON/OFF switch both flashing. Window reads 'CHECK PRINTER'. What exactly do I check? Window had been reading 'WASTE INK NEARLY FULL' for a fortnight, but I couldn't find out how to deal with...


The waste ink absorber is getting full.
Press the OK button to clear the error.
Printing can be done until the waste ink absorber becomes full. If the waste ink absorber becomes full, please contact your local Service Center for replacement of the absorber and machine maintenance.

The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations, etc. http://support-nz.canon.co.nz/contents/NZ/EN/8000137103.html

Nov 09, 2009 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

Ink absorber full


This is a very common problems with canon printers. They are set for a certain number of prints and they need the ink absorber serviced. Now along with resetting the printer its best to replace the absorber. Here is link to site that has reset instructions.
http://ij-forum.blogspot.com/2008/08/reset-waste-ink-absorber-error-waste.html
Thanks,
Lee

Nov 05, 2009 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

Canon pixma 1200 waste ink absorber


u must change now cartiradge good luck enjoy vote for my comment

Aug 06, 2009 | Canon PIXMA iP1600 Printer

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

Canon printer mp160 e27


how can i get my ink absorber to be unful and work agian so i can print again WANALI

Aug 26, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Waste ink absorber


hi i am a certiffied Canon repair tech for this model. this is true this will reset the error but doing so without replacing the waste asorber pad in the bottom of the machine will cause your machine to backup waste ink into the the printing area of the machine and will start smuging ink on the page. the waste absorber is fairly cheap but the labor varies from shop to shop. there are independent Canon repair shops throughout the world. you can call 1-800-ok- canon or look on the canon website. hope this help to clairify.

Dec 22, 2007 | Canon PIXMA iP2000 InkJet Printer

Not finding what you are looking for?
Canon i80 InkJet Printer Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...