Hello, i sure hope someone can help. i configured this locationfree fine at home and it showed clear on my laptop, now that i am away from the base station i keep getting a message telling me i am not on the same domain, which i am not, i need help. any suggestions pls email me firstname.lastname@example.org thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Log into your LFP's settings page by entering the players IP address into your web browser. Then scroll down to access control and enable "Access via Global IP Address". It should start working right away
Log into your LFP's settings page by entering the players IP address
into your web browser. Then scroll down to access control and enable
"Access via Global IP Address". It should start working right away
Hello, this is Matthew Gonzales with DISH Network customer service. To answer your question, yes the ViP211 will work with a dish 500. It will receive the standard channels as you asked, but if you wish to get HD, the dish on your home will need to be upgraded. Hope this helps!
Unfortunately we are not permitted to provide serial numbers , illegal
download links or software to bypass the copyright protection of
accordance with our terms and conditions and the DMCA copyright laws.
If you bought the product legally you should contact the manufacturer.
The contact details should be on the side or back of the box or CD
I hope you understand. Feel free to contact me if you have any questions.
You sure describe a bad receiver to me. Press MENU-6-1-3 and select details. Scroll down the page and you will see a section of VALUES 1-9 all should be zeroed except 7 which should not be over 4 and 8 at 1. If yours reads anything greater you will need it replaced.
Call in and ask for a Field Service Manager, Installation Manager or Quality Assurance Specialist to come to your home due to unresolved issues. To ensure you get a response e-mail or call the corporate office describing your situation. Do not call the toll free number for the corporate office as you will not get them.
We are unable to give numbers out so you may need to do some research of your own.
You may have a tunner problem. Try this turn your TV to channel 3 connect you cable to it and select a channel. If thesound has a problem what may be happening is the the audio detector may not be working properly or the audio amplification stages may not be working correctly from the audio detector. You will have to test the audio stage from the detector to the last audio amplifier to troubleshoot this problem. If you have experiences in this that's good if not take the set to a qualified service technician.