Question about Toshiba Televison & Video

Open Question

Toshiba 329P8M with Remote CT-9335

I don't have the remote's manual and I want to watch different channels in PIP.

Can you please let me know how I do it with my remote ?

Thanks

Jay

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Remote died while tv was on Video 2

To fix that problem on the Toshiba 32AF41 just follow these instructions. On the front of the TV there are seven buttons. One of the them is labeled "TV/VIDEO". Just press it until it switches from "VIDEO 2" to "TV". That simple.

Posted on Feb 18, 2007

techman
  • 3130 Answers

SOURCE: need to find manual for remot

I tryed to look this up for you and I did find the remote on the web site but when I tryed to view the documentation on the remote a note came up and said that there was no on-line documetation for this remote, but I could contact Phililps for it at: 1-888-PHILIPS (1-888-744-5477) Good Luck

Posted on Apr 27, 2007

  • 11 Answers

SOURCE: No remote and cannot change to video mode!

Go to radio shack and get an universal remote control that has a tv/vcr input button. the one i got is a Phillips Universal to switch channels myself.

Posted on Sep 13, 2008

mediarich
  • 188 Answers

SOURCE: Tuning a Toshiba CT 9689

I just tried finding a manual for the toshiba and didn't find much. In the setup menu there should be an auto setup for tuning in channels. Cable or off-air. Let the system do an auto set-up to find channels available. I'll keep looking for a manual. Let me know how you do.

Posted on Sep 22, 2008

  • 135 Answers

SOURCE: PIP on old panasonic tv only shows the channel you are watching

The model number please or if you go to the Panasonic website you can dowload an instruction manual.
SUPER8

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba 32a33. I'll be watching tv and the volume bar shows goes down to 0 (no sound) when it is in this mode the remote control will not work on the volume, you can get up and manually up the volume...


1st check to see if your remote volume down button is stuck. 2nd do you have wireless internet (router) or any other wireless devices phones,ceiling fans, another Toshiba remote, if so try unplugging them (or remove the batteries if it's a remote) while it's changing the volume one at a time. If a different device makes it stop try changing the channel on it. Also make sure the t.v doesn't have a mind of its own and remove the batteries out of the t.v remote, let it ride for a couple days if it happens without the remote being in play then you know your t.v is acting strange, if it stops then starts back up when you start using the remote again then you know your dealing with a remote issue. Sometimes Freq.'s merge causing remotes/wireless devices to conflict with each other.

May 18, 2011 | Toshiba 32A33 32" TV

1 Answer

TV Remote for Toshiba 32A41 does not work


YOU SOUND LIKE THE REMOTE SENSOR BAD IF YOU CLEAN THE SCREEN WITH WINDEX IT HAS GOT ON THE SENSOR THE SENSOR HAS 3 LEGGS

Aug 24, 2009 | Toshiba 32A41 32" TV

1 Answer

Set up digital set top box


Either tune your TV to channel 2 or 3 or (on some TV's) to 91.
Then, connect the COAX-output from the set-top-box to the COAX-input on your TV, or connect the "output" Red/White/Yellow RCA-jacks on the set-top-box to the Red/White/Yellow "input" RCA-jacks on your TV.

Apr 23, 2009 | Toshiba Televison & Video

2 Answers

PIP on old panasonic tv only shows the channel you are watching


Determine your exact model - there should be a sticker on the back.
Similar to: CT32HX40B, CT32HC43G, CT32S20U, etc, etc.

Go to below link and download the appropriate PDF for your model.
(Tip: Set page to " Show All Rows" for ease of use.
http://service.us.panasonic.com/operman/findmanual.aspx?cat=DTV

Depending on your source input (Cable, Antenna, both) - the PIP instructions will vary.

Note: The PIP is not all it is cracked up to be anyway, so you may be wasting your time, also if you get the PIP in a stuck mode... See the link to fix it: http://www.fixya.com/support/t664989-turn_off_panasonic_pip


Jan 03, 2009 | Panasonic CT-36HL43 36" TV

1 Answer

Remote


Hello. Here's your instructions:

Press the MENU key. Press the up/down arrows to get to Input Connfiguration. Press the right left/keys to change to CABLE, and then press enter. Then press the up/down arrows to get to Auto Ch Search. Press the right arrow or ENTER, and let the tv go through all the channels to add them - this make take a little time.

Hope this helps, please rate! :)

Oct 26, 2008 | Toshiba 32A50 32" TV

1 Answer

Tuning a Toshiba CT 9689


I just tried finding a manual for the toshiba and didn't find much. In the setup menu there should be an auto setup for tuning in channels. Cable or off-air. Let the system do an auto set-up to find channels available. I'll keep looking for a manual. Let me know how you do.

Sep 22, 2008 | Televison & Video

2 Answers

Akai CT-2868AT


I had the same problem with a broken remote for the Akai CT-2868AT which meant I could not access the AV channel. I bought the one-for-all (model URC-7711) universal remote which worked with this model TV.

May 12, 2008 | Televison & Video

1 Answer

Pip won't turn off


how did you explain the problem you have to reach the correct code
from remote to turn off or on of the pip circuit - i can suggest to
use the original remote control or somethig else delfo

Mar 21, 2008 | Panasonic CT-32G22 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...