Question about Whirlpool Dishwashers
SOURCE: My whirlpool adp 5962 does
This is a very common issue. The touch pad assembly would need to be replaced to fix the issue. This is a easy repair to make, the parts can be had from the link below as well. The screws around the touch pad need to be removed to complete this repair.
Appliance & Refrigerator Repair
Posted on Mar 23, 2011
SOURCE: Whirlpool ADP951 Dishwasher
Processor board sound bad. May be a loose plug ( or corroded connection on the plug ) . Unplug the dish washer from the wall plug before servicing. The open the front panel to expose the panel control board. Unplug the panel plugs and inspect them to assure no corrotion is apparent. If you see corrotion, use a pencil erracer to clean all contact points on the board and clean the plug the best possible. Plug the dishwasher plug back in the wall and check the unit for proper operation. If the operation is not correct, replace the circuit board. I hope this helps
Posted on Jan 06, 2008
Tips for a great answer:
Nov 23, 2011 | Whirlpool 24 in. ADP5966 Free-standing...
Mar 23, 2011 | Whirlpool 24 in. ADP5962 Free-standing...
Sep 17, 2009 | Whirlpool 24 in. ADP6940 Dishwasher
Sep 01, 2009 | Whirlpool GU2400XTP Built-in Dishwasher
May 25, 2009 | Dishwashers
Apr 23, 2009 | Whirlpool 24 in. ADP5966 Free-standing...
Feb 08, 2009 | Kitchen and Much More Dishwashers
May 13, 2008 | Whirlpool 24 in. ADP5966 Free-standing...
122 people viewed this question
Usually answered in minutes!