Question about Lexmark C760 Laser Printer

1 Answer

Lvps how to replace lower voltage power supply on lexmark c760 priter

Posted by on

  • frank245 Aug 28, 2008

    Thhank you

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Remove the fuser assembly
Remove the rear cover
Remove the fuser top duct screw and disconnect tab
Remove the top duct
Remove the redrive belt cover duct
Remove fuser left duct
Remove fuser bottom duct
Swing lever and disengage VTB shaft
Remove the fuser drive assembly screws and remove the fuser drive assembly
Disconnect the J33 and J35 cables from the system board
Remove the four LVPS screws from the rear of the printer
Remove the right rear cover screw
Remove the screw from the top of the LVPS and remove the LVPS from the
printer.
Installation notes
When installing the new power supply, set the voltage range switch to the proper power setting for the
geographic area you are in.
Be sure to set the voltage range selector switch (A) on the LVPS to the proper setting.

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No display


Try to power cycle the printer Ii.e., power off and on).Verify whether machine has power (check fan, LED). Verify if fan is running. If fan is not running, replace LVPS (Low voltage power supply. Part # 40X5409. For further assistance please contact Lexmark Technical Support.

Feb 28, 2012 | Lexmark C530dn Laser Printer

1 Answer

Error 931


In most cases this error has something to do with the printers LVPS (Low Voltage Power Supply ).
If the printer is connected to power surge, try to connect it to an outlet from the wall. Do an An AC power check - check the AC line voltage at the end of the AC line cord. If the Ac line cord is incorrect, replace the cord.
Also check if the cord is in good condition. if not, replace the cord. If you still get the same errror, you may need to replace the printers' LVPS.
For further assistance assistance please contact Lexmark Technical Support.

Feb 09, 2012 | Lexmark C750 Laser Printer

1 Answer

Lexmark c770 dead


Please try reseat power cable. If this does not resolve the issue, you may need to replace the LVPS ( Low voltage power supply) on your printer.
For further diagnosis, please contact Lexmark Technical Support Center at 1-800-539-6275.

Jul 14, 2011 | Lexmark C770n Laser Printer

1 Answer

My Lexmark C544dn laser printer just up and died - I had just put in new paper, hit print on my Mac and when nothing happened, I realized the machine was off. Yes, I checked the power cord at the machine...


Please try to do the following steps

• Check the AC line voltage. Is the line voltage correct? If not connect it to the correct line voltage
• Check if the AC line cord damaged. If damaged replace the AC line cord
• Is the LVPS cable correctly connected at JLVPS1 on the controller board? If not Reconnect the cable at JLVPS1
• Turn the printer off, and then on. Does the problem persist?
• Damage to the printer is possible. Be careful to touch only one conductor at a time, Rest the probe against the connector to steady it.
• Replace the LVPS - Low-voltage power supply (LVPS)

Please contact Lexmark Technical Support for further assistance.

Mar 26, 2011 | Lexmark C544dn Laser Printer

1 Answer

My printer doesnt work it doenst switch on at all


If printer doesn't work and it doesn't switch on, I assumed that there is no power at all on the printer. Check the AC line voltage if it is correct.

Unplug the printer. Remove the LVPS/HVPS, and check the fuses for continuity.

• If open, then replace the LVPS/HVPS.
• If not open, then check the switch continuity across its conductors with the switch on.
Turn the switch off. Plug the AC line into the LVPS/HVPS, and switch unit on.

Please try reseat power cable. If this does not resolve the issue, you may need to replace the LVPS (Low voltage power supply) on your printer.

For further assistance, please contact Lexmark Technical Support

Feb 07, 2011 | Lexmark E260 Laser Printer

1 Answer

Color LAser Printer is plugged in , everything has been checked - printer won't turn on. Changed cords, tried different printer in electrical socket, printing from a different computer, etc. - nothing...


Based on your troubleeshooting already preformed. the next step would be to replace the LVPS (Low Voltage power Supply)
After replacing that if their is still no power it would be on to the HVPS (High Voltage Power Supply)
7413293.gif

Oct 18, 2010 | Lexmark C752 Printer

1 Answer

I have a x340 all in one. The paper tray was slammed shut to hard and now there is no power. I suspect the wiring directly behind the paper tray. How do I get a wiring diagram


Hi,
In this case I will recommend to replace the Low Voltage Power supply. For what you are saying maybe something got damaged in the LVPS.

Feb 04, 2010 | Lexmark X340n All-In-One Laser Printer

1 Answer

Lexmark c760 printer stopped printing, no lights no power HELP


if you have no lights on the display, the possibility of a bad power supply is good, bring it to any of the computer store with a service or a computer repair shop, have them check it. if you have voltmeter, test the output from the low voltage transformer that goes into the printer against the rating on the transformer.

Mar 02, 2009 | Lexmark C760 Laser Printer

2 Answers

The printer (Lexmark C760) won't power on


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 05, 2009 | Lexmark C760 Laser Printer

1 Answer

Printer C760


This error normally requires a service call. However, certain rare occurrences, such as a stray static discharge in the vicinity of the printer or a power fluctuation, can cause a false 103 ITU error message to appear. If possible, connect the printer's power cord directly into a grounded wall outlet. In rare instances, a surge protector or uninterruptible power supply (UPS) can generate false error messages.

Aug 13, 2007 | Lexmark C760 Laser Printer

Not finding what you are looking for?
Lexmark C760 Laser Printer Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...