Question about Singer CE-100 Futura Computerized Sewing Machine

1 Answer

Sewing straight stich

Hi my Futura CE-150 when I try to sew straight it beeps and the light on 19 lights up. The thread isn't broken and I have rethreaded the machine according to the instruction manual. Can you offer other suggestions?

Posted by on

  • Lness1 Sep 07, 2008

    I have the same problem where the #19 light is always coming on when I try to embroider. I too have followed the instructions for threading. How do you know when tension is too tight. I can't figure it out

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and it turned out the tension was too tight. I had the thread spool holder too tight against the thread spool.

Posted on Sep 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Singer Futura CE-150 and it keeps stopping due to "Thread break error" but the thread and bobbin seem okay what could it be?


Either upper thread is not passing through thread sensor area or sensor is broken.
Second possible reason is that if design is not optimized the sporadic speed change provides thread breakage error even if the thread is not broken physically. Make sure your software is updated to optimize it automatically (Futura main menu->Help->Live Update).

Dec 20, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Will only sew for 3 inches then the lights flash (19) and it stops sewing. Will sew another 3 inches and repeat......


check threading on upper thread, if correct then there is sensor error and must be taken to singer service person

Sep 24, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Singer Ce-150 Error 19


The top little circle you think you're supposed to wrap your string around - the one that you wrap the thread around to fill the bobbin -- thats not what you're supposed to wrap it around. Im an idiot, and thats what I was using. My friend Amanda showed me what I did wrong.. LOL

Apr 28, 2009 | Singer CE-200 Quantum Futura Computerized...

1 Answer

"thread breakage detected"


I had the same problem and one day my 9 year old said Mommy the thread is winding and cathing. I noticed that if the thread is not close to the silver metal arm it coils and makes a knot around the silver feed arm and also sometimes it cathces the little white plastic peace where the silver feed arm is connected to the machine.

Mar 24, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Flashing red light


Are you sure you have turned the foot button underneath the machine back to normal stiching and also then again for embroidary and have you placed the protective cover back for normal stiching once you removed the embroidary arm.

Mar 08, 2009 | Singer CE-200 Quantum Futura Computerized...

2 Answers

My Futura CE-150 beeps and stops sewing after only a few stitches


Look for the buttonhole lever, just in front of the presserlever, on the lefthand side of the machine. Pull it down and push it back to the top. Good Luck

Jan 10, 2009 | Singer CE-200 Quantum Futura Computerized...

2 Answers

A brand new Singer Quantum Futura CE 200 Sewing/Embroidery machine, have not been able to embroider or sew a single stich, all I have been able to do is wind the bobbin. When I'm going to start...


Dear Magarita, The safety device is activated when thread gets entangled around the bobbin case. First check by removing the plastic see-through plate. If necessary remove the 2 scews on the metal needle plate and remove the bobbin case completely. Put it back and test by turning the handwheel. It should turn freely.

Hope this solves your problem.

Dec 08, 2008 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Unable to sew straight stictch with singer futura ce 100


When I had this experience I cleaned the thread path under the plastic cover. There was a piece of thread caught between the disks.

Aug 09, 2008 | Singer CE-200 Quantum Futura Computerized...

4 Answers

Singer futura CE-100 4 blinking reds lights


This error indictaes that the upper thread is broken. If it is not the sensor is telling the computer the thread is broken. Try tightening the upper thread tension some and rethread the upper thread.

Dec 23, 2007 | Singer CE-100 Futura Computerized Sewing...

Not finding what you are looking for?
Singer CE-100 Futura Computerized Sewing Machine Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...