Question about Dryers

1 Answer

NEED TO REPLACE BELT ON MODEL lde 412 series 02 serial no. 618 889 PX

Posted by on

  • Gary Davd
    Gary Davd May 11, 2010

    what is the make?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

Its a maytag,
LDE 412 series 02, the labelling printing machine at Maytag is notoriously crappy

Unplug dryer
Remove two screws at bottom edge of front panel, under the lip facing up so they are hard to see.

  • May be TORX secure screws(star shap with a pin in the middle), TORX secure bits ~$6 at good tool shops, or cut a slot across the head of the screw and use a flat blade, throw the torx away and replace with phillips head screws, easier for next time
.
tilt front panel up from the bottom and unhook it from the catches
undo door switch cables
place door aside
lift drum out
motor, belt, bearings, felts, are all easily accessible.
check felts and roller bearings before you put the case back on, often a seized bearing is cause of belts breaking

While you have the case off pull all the lint n **** out of vent and motor area

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Piano from Casio Named The PX830 BP.I also have a Sustain Pedal Model from Casio named the SP 33.Will connecting the SP 33 into the PX830 BP work?Please tell me if I have the wrong model.


Unfortunately, the SP33 pedal will not work with the PX-830BP. Casio lists that the SP33 will only work with the PX-150BK, PX-150WE, PX-160BK, PX-160GD, PX-350BK, PX-350WE, PX- 360, and PX-560 keyboards.

The PX-830 manual does not list the stand or the pedal unit as separate items if you need to replace them. The pedal unit has 3 pedals like a traditional piano. I wish that I had better news for you.

Cindy Wells

Feb 04, 2016 | Casio Music

1 Answer

Speakers for aiwa PX- E90HE stereo turntable


you also need an amp or reciever, just hooking up speakers to this turntable will not work

Mar 08, 2013 | Audio Players & Recorders

1 Answer

BMWW 318I 1993 SERIAL NUMBER 468053 DOES IT USED TIMING BELT OR A TIMING CHAIN


timing chain?

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 30, 2012 | 1993 BMW 3 Series

1 Answer

PX-E860 Turntable: I need to replace the cartridge of my aiwa turntab...


my aiwa PX -E800 TURNATBLE has stopped working ,, is there anywhere i can get a replacement turntable .

Regards

Trevor

May 17, 2010 | Aiwa PX-E860 Turntable

1 Answer

Maytag Dryer Model #LDE 4916 ACE. Dryer won't start


Sorry, no reset button. If it ran a bit without the belt, it may have overheated and blown one of the thermal fuses. You can find schematics and diagrams at
www.appliancepartspros.com
Good luck.

Mar 15, 2010 | Dryers

1 Answer

How do I attach the turntable belt to the Aiwa px e850


Lift the platter off the turntable. You can identify the motor spindle by using your fingers to turn the round shaft which rotates freely. Remove the rubber mat off the platter. Place the belt around the outside of the drum on the bottom of the platter. From the top of the platter, place your finger in one of the platter holes and tension the belt so it will not fall off or twist. Griping the platter trough the holes while keeping tension on the belt place the platter on the turntable aligning your finger with the belt to the motor spindle. Place the section of the belt on your finger over the motor spindle. Replace the rubber mat on the platter.

Nov 05, 2009 | Aiwa PX-E860 Turntable

1 Answer

I have a maytag lde-412 electric dryer that a customer of mine wants a new belt put on ive looked up the part and can find one but i need a diagram fo how the belt goes on .


The last belt I bought had a diagram printed right on the plastic bag it came in. Call your parts place and see if yours is the same.

Jan 24, 2009 | Dryers

1 Answer

Plextor model px-av100u software


Are you still looking for the software? I have the original here if you need a copy. Do you have your serial number?

Oct 11, 2008 | Plextor ConvertX PX-AV100U Video Capture

Not finding what you are looking for?
Dryers Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...