Question about Panasonic Palmcam PV-DC2090 Digital Camera
Since the cameras do not have an optical viewfinder, how does the LCD work in the sunlight?
Posted by Anonymous on
The 2.5" LCD on both cameras uses a special back lighting system to help cut down on sun glare.
Posted on Sep 01, 2005
Tips for a great answer:
The display being distorted can be due to failure of the LCD or the CCD which is the optical sensor of the camera. So to confirm check the older picture to be seen on the display. Confirm this by checking the card on your PC. If the images/picture is seen to be of good quality, then the LCD can be faulty, fault on the linking cable or the control board.
However if the older images are seen well then the LCD is working correctly and the fault can be failure of the CCD- charge coupled device in the camera. If you have accidently exposed the camera directly to high intensity light / sunlight, then it is possible that it is damaged. Remove the battery and keep the camera aside to reset and try as a last resort. Get estimate before you decide. It will be good to have it checked at the authorised service as you do not have to run around for spares.
Please click on the link for tips to replace a LCD
Sep 29, 2011 | Nikon COOLPIX P90 Digital Camera
Feb 21, 2009 | Sony Cyber-Shot DSC-V1 Digital Camera
Sep 03, 2008 | Canon Digital Cameras
Jul 25, 2008 | Canon Digital Cameras
Jul 03, 2007 | Konica Minolta DiMAGE G400 Digital Camera
21 people viewed this question
Usually answered in minutes!