Question about Televison & Video

1 Answer

Help I am confused. After I have connected my new Sony DVD player to my TV which remote so I use. The one from my digital cable service or the DVD player remote? I turned the DVD player on and it says Welcome. then I put the DVD in and nothing happens, but a count of numbers on the DVD player. When remote do I use to set it up?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

Use the remote that came with the DVD. If you want to use the cable remote, you need to program it using the codes in the manual that came with the cable box or remote.

the numbers usually mean an error. commonly, C 13:00 means that the Disk is dirty.

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV is a Sharp-AQUOS Model # LC52D64U, I have 2 DVD players. SONY DVD player Model #DVP-S530D and MAGNAVOX VIDEO CASSETTE RECORDER/DVD PLAYER MODEL#MWD2206. Thanks Barbara


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC42_46_52D64U.pdf




SONY DVD PLAYER - MODEL # DVP-S530D:

http://www.docs.sony.com/reflib/docget.asp?manualid=8499&template_id=1&region_id=1&DL
=




MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:


http://download.m4c.magnavox.com/files/c/cmwd2206_f7/cmwd2206_f7_dfu_aen.pdf




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.


You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.




DIRECTV CONNECTION TO TV


Make sure your TV and DirecTV receiver are turned off before making any cable connections.
Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.
Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.
Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.
See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.


Here also is a link to a short video which demonstrates this basic HDMI connection procedure:

http://www.youtube.com/watch?v=J7P-yayRJ6c&NR=1




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.
In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.
At this point you should be getting an input signal from the DirecTV Receiver on your TV.
That completes the DIRECTV to TV connection portion of the system hook-up procedure.



SONY DVD PLAYER CONNECTION TO TV


Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.
Here is a link to a picture of an S-Video cable in case you need to see one:


http://amazingbestsellerstore.tk/wp-content/uploads/2011/08/31nOF2e5DXL.jpg





And here is a link to a picture of a set of 3 color RCA cables:


http://www.cameratron.co.za/images/productcables/cables/rca%20to%20rca.jpg




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.
See page 8 of the SONY DVD Player manual.
Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.
Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.
Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.
In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.
At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.
This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.


MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION

I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.
COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.
Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.
YELLOW cable plugs into the VIDEO OUT connector.
RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.
See page 7 of the MAGNAVOX manual, METHOD 1.
Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.
YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.
RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.

In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.
Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.
At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.
This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.
Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.

This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.


Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Oct 05, 2011 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV

1 Answer

What's your problem?NO MANUAL FOR 52" sHARP


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForH...




SONY DVD PLAYER - MODEL # DVP-S530D:



http://www.docs.sony.com/reflib/docget.a...





MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:



http://download.m4c.magnavox.com/files/c...




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.



You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.





DIRECTV CONNECTION TO TV



Make sure your TV and DirecTV receiver are turned off before making any cable connections.

Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.

Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.

Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.

See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.



Here also is a link to a short video which demonstrates this basic HDMI connection procedure:


http://www.youtube.com/watch?v=J7P-yayRJ...




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.

In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.

At this point you should be getting an input signal from the DirecTV Receiver on your TV.

That completes the DIRECTV to TV connection portion of the system hook-up procedure.




SONY DVD PLAYER CONNECTION TO TV



Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.

Here is a link to a picture of an S-Video cable in case you need to see one:



http://amazingbestsellerstore.tk/wp-cont...





And here is a link to a picture of a set of 3 color RCA cables:



http://www.cameratron.co.za/images/produ...




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.

See page 8 of the SONY DVD Player manual.

Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.

Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.

Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.

In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.

At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.

This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.



MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION



I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.

COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.

Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.

YELLOW cable plugs into the VIDEO OUT connector.

RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.

See page 7 of the MAGNAVOX manual, METHOD 1.

Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.

YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.

RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.


In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.

Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.

At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.

This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.

Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.


This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.



Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.


I hope that was helpful to you, good luck and take care.


Joe.

Oct 04, 2011 | Televison & Video

1 Answer

I own an iview 2600hd dvd player and im trying to hook it up to my sony trinitron tv...however, no matter how i switch my cables, the dvd player just won't show any picture or audio on my tv...and when...


Try new cables. RCA cables have a tendency to have bad connections internally. Also, triple check that you're on the right input and the wires are properly connected to the DVD player. If all that fails, try the DVD player on a different T.V. and something that uses RCA cables on your T.V, such as a cable box to make sure the input jacks on the T.V. aren't bad, and the DVD player isn't bad.
Through out all of this troubleshooting, you should manage to get the DVD player hooked up.

Jun 20, 2011 | Televison & Video

1 Answer

I have a sony triniton color tv medel 3 KV-DR34M89. How do i connecft and play a DVD on it.. i treid connect the yellow,red and white cables on all the slots but no success. please advise


Connect cables:
Connect yellow to yellow (dvd player to TV)
Connect white to white (dvd player to TV)
Power on DVD and TV and insert a DVD into the player, press PLAY.
Use your TV remote to select the proper input:
Your remote should have a button like INPUT SELECT or Video, keep pressing until you see the DVD players output.

Feb 20, 2011 | Sony FD Trinitron WEGA KD-27FS170 TV

1 Answer

Connected my DVD player to my new Sony Bravia BX4 40 with scart, get a picture but no sound. also tried to connecting my PS2 and i am getting the same problem....any ideas!?


Using the manual that came with your TV, recheck all of your connections. They are specifically marked for audio and video and have the connections for a number of components. I have a Sony Bravias and my audio cables are yellow on the end and the videos are red and white. What sort of TV Service do you have? Cable or Satellite. When you are wanting to use the DVD player, you have to change the input using the the input button on your remote to get an onscreen menu of all your components.If you have Satellite TV, you can use your Satellite remote to do this.

Let me know if this does not help. These are great TVS!

Dec 29, 2010 | Televison & Video

1 Answer

HOW TO SET UP SONY DVD PLAYER WITH HITACHI 42 LCD TV


Connect yellow video output on DVD player to yellow video input on TV using RCA cable. Connect white audio output on DVD player to white audio input on TV next to yellow. Connect red audio output on DVD (next to white) to red audio input on TV using RCA cable. Select on the TV using remote, the proper input for DVD player connection.

Aug 08, 2010 | Sony Televison & Video

1 Answer

I need to hook up the dvd player to my new Sony


you have a flat screen, look on the back of the flat panel for digital in (yellow, white & red jacks). this will be connected to yes the DVD player. using your tv remote switch the source enable to watch a DVD. you comcast cable is still connected to watch this simply switch back to cable source..

Jul 19, 2010 | Sony DVP-NS50P DVD Player

1 Answer

I need help connecting sony dvp ns 300 to a jvc tv. I can't watch dvd at all, confused about the wiring where does it go?


The CD/DVD player has three output ports:
(i) Line out Video used to connect the yellow pin of composite cable.
(ii) S-video out use d to connect an S-video cable.
(iii) Component video out (red, blue, green) used to connect a component video cable.

So, in order to connect the CD/DVD player to the TV, the TV should have either of the corresponding input port on it.

However, the video quality transmitted by component video cable will be the best among the three.

So, you may connect the TV and the CD/DVD player using an appropriate cable.

All the above connections require an additional audio cable to transmit audio from the CD/DVD player to the TV.
In this case, you may use an RCA (red and white) audio cable to connect the "R and L" audio out port on the CD/DVD player to the corresponding "R and L" audio in port on the TV.

Performing all the above steps will help you get the DVD player work with the TV.



wish u good luck!!!!!!!!!!

Sep 17, 2009 | Sony DVP-NS300 DVD Player

2 Answers

Code to enter on remote


i have new Sony BDP-S350 Blu-ray disc player. i want to connect it to E-net and some other devices, Camcoder, Pc, Laptop. i have got all HD ready cables,
I want to use the Universal Remote from my Sony Bravia LCD 42'' TV and Blu-Ray. can anyone help me?
thanks

omar

Dec 10, 2007 | Sony BDP-S300 Blu-Ray Disc Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73451 Answers

Cindy Wells

Level 3 Expert

5020 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...